480 Size Brushless Outrunner, 900Kv

I got a set of these for a TriCopter to replace some motors that had a bit too much shake in them and wanted a little more power. I didn't know anything about these and figured I'd test them out since they were a good middle ground on the price. When they showed up i was amazed at the build quality. Also included was all the extras needed such as the bullets were already on the motor and the matching ones were included. Also included was the prop adapter and plenty of heat shrink.

I got them mounted up and with 10x4.7 props and flew a 2lb tricopter for 6 minutes on a 2200 3s battery and only took it down to 3.8v. I've only got a few flights on them but they seem to be quality motors for a good price. I will be getting more for future projects.

Would not recommend these motors I bought one and it went out within 5 flights sent it in for replacement and the replacement went out after about 7 flights. I know it is not my setup I am a very experienced electric RC'er. I have replaced it with another motor and have at least 40 to 50 flights on that motor without any problems. I am just out 30 bucks here. (Comment from HL: We fully warranty these for a year. It sounds like this customer was using the motor beyond it's rated specs.)