Uberall Nippy Black Outrunner Brushless Motors from Hobby Lobby!

Uberall "Nippy Black" Outrunner
Brushless Motors

You open the throttle to FULL and watch your airplane silently and powerfully climb like you’ve never seen before!

Mysteriously powerful motors - These tiny "External Rotor" brushless motors are radically powerful and they are efficient -- longer flights on a charge. But there's another aspect that's better. They give a different "feel" to the flying of the model airplane: At half throttle, you'll feel that the motor is silently pulling the airplane through the air at flying speeds -- effortlessly. Then when you open the throttle to FULL you'll see your airplane shoot ahead like you've never seen before -- effortlessly and silently. You are seeing and "feeling" raw, silent power. It is mysterious. It is flight without limits. It is flight with Hobby Lobby's Outrunner Brushless Motors.

For airplanes to 28 oz., 3D airplanes to 19 oz., gliders to 38 oz.

1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface), 4mm prop shaft, 2.14 oz. Direct drive design. Use with 8-10 cells and a Jeti 12 Amp controller and APC props from 9x4.5 to 11x5.5. Maximum sustained current 12 amps. Aluminum motor mount included.

COMBO: Order your Nippy Black 1210/103 with a Jeti 12 amp brushless controller and SAVE!

For airplanes to 32 oz., 3D airplanes to 26 oz., gliders to 53 oz.

1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface), 4mm prop shaft, 2.13 oz. Direct drive design. Use with 8-12 cells and a Jeti 18 Amp controller and APC props from 8x4 to 11x5.5. Maximum sustained current 18 amps. Aluminum motor mount included.

COMBO: Order your Nippy Black 1812/100 with a Jeti 18 amp brushless controller and SAVE!

For airplanes to 53 oz., 3D airplanes to 44 oz., gliders to 70 oz.

1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface), 4mm prop shaft, 2.40 oz. Direct drive design. Use with 8-10 cells and a Jeti 30 Amp controller and APC props from 10x6 to 11x8.5. Maximum sustained current 25 amps. Aluminum motor mount included.

COMBO: Order your Nippy Black 2510/114 with a Jeti 30 amp brushless controller and SAVE!

Flexible propeller mounts

Aluminum prop saver propeller adapters

1/2" diameter, 3/8" deep, less than 3 grams. Screw this to your motor or gearbox, rubberband your prop on and go fly. Protects your motor or gearbox from the shock of prop strike. Save your prop from breaking on a nose over. Particularly good for all small external rotor brushless motors.

Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948

You open the throttle to FULL and watch your airplane silently and powerfully climb like you’ve never seen before! Mysteriously powerful motors - These tiny "External Rotor" brushless motors are radically powerful and they are efficient -- longer flights on a charge. But there's another aspect that's better. They give a different "feel" to the flying of the model airplane: At half throttle, you'll feel that the motor is silently pulling the airplane through the air at flying speeds -- effortlessly. Then when you open the throttle to FULL you'll see your airplane shoot ahead like you've never seen before -- effortlessly and silently. You are seeing and "feeling" raw, silent power. It is mysterious. It is flight without limits. It is flight with Hobby Lobby's Outrunner Brushless Motors.

For airplanes to 28 oz., 3D airplanes to 19 oz., gliders to 38 oz.
	UBR1210 "Nippy Black" 1210/103 External Rotor Brushless Motor ..... $53.90 SOLD OUT! 1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface), 4mm prop shaft, 2.14 oz. Direct drive design. Use with 8-10 cells and a Jeti 12 Amp controller and APC props from 9x4.5 to 11x5.5. Maximum sustained current 12 amps. Aluminum motor mount included. COMBO: Order your Nippy Black 1210/103 with a Jeti 12 amp brushless controller and SAVE!


For airplanes to 32 oz., 3D airplanes to 26 oz., gliders to 53 oz.
	UBR1812 "Nippy Black" 1812/100 External Rotor Brushless Motor ..... $53.90 SOLD OUT! 1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface), 4mm prop shaft, 2.13 oz. Direct drive design. Use with 8-12 cells and a Jeti 18 Amp controller and APC props from 8x4 to 11x5.5. Maximum sustained current 18 amps. Aluminum motor mount included. COMBO: Order your Nippy Black 1812/100 with a Jeti 18 amp brushless controller and SAVE!


For airplanes to 53 oz., 3D airplanes to 44 oz., gliders to 70 oz.
	UBR2510 "Nippy Black" 2510/114 External Rotor Brushless Motor ..... $53.90 SOLD OUT! 1-5/8" diameter, 1-1/2" long (from prop backplate to firewall mounting surface), 4mm prop shaft, 2.40 oz. Direct drive design. Use with 8-10 cells and a Jeti 30 Amp controller and APC props from 10x6 to 11x8.5. Maximum sustained current 25 amps. Aluminum motor mount included. COMBO: Order your Nippy Black 2510/114 with a Jeti 30 amp brushless controller and SAVE!


Flexible propeller mounts
1/2" diameter, 3/8" deep, less than 3 grams. Screw this to your motor or gearbox, rubberband your prop on and go fly. Protects your motor or gearbox from the shock of prop strike. Save your prop from breaking on a nose over. Particularly good for all small external rotor brushless motors.	PJS023 Aluminum "Prop Saver" Propeller Adapter, 2.3mm ..... $ 7.40 AVAILABLE NOW PJS032 Aluminum "Prop Saver" Propeller Adapter, 3.2mm ..... $ 7.40 AVAILABLE NOW PJS040 Aluminum "Prop Saver" Propeller Adapter, 4mm ..... $ 7.40 AVAILABLE NOW

Uberall "Nippy Black" Outrunner Brushless Motors

Uberall "Nippy Black" Outrunner
Brushless Motors