Complete with 5 servos installed, 80mm dynamically balanced fan |
34-1/2 in. wingspan, 34-3/4 in. long, 30 oz. flying weight, 212-1/2 sq. in. wing area. The FJ-3 Fury was the Navy's version of the famous Korean War Era F-86 Sabre. Our super scale version has great detail and includes everything that you need less the radio system and battery. Much of the work is already done for you; the 80mm dynamically balanced fan and brushless motor (2600 Kv) is pre-installed as is the 45A ESC with switch mode BEC. 5 precision servos are also pre-installed, four 9g nylon gear and one 9g metal gear. All control surfaces are pin hinged for smooth slop free movement and come pre-installed. Carbon reinforcements are included for the main wing and the horizontal tail. The assembly manual is very detailed and full of exploded view drawings to aid in quick assembly. The decals are water slide and left for the builder to install after assembly. The FJ-3 is a solid performer with an extremely axial roll. The swept wing design is very stable with no tip stall tendencies and a broad speed range. The fixed landing gear are scale in appearance and strong. Jet is designed for take off and landing from a runway but can be flown off short grass. Required to complete is a radio system, 4-cell 2200 Lipo battery and Lithium battery charger, glue and tools.
FJ-3 Fury Navy Jet ARF PDF Instructions
The elevator servo wiring, imbedded in the fuselage, was bad. No way to get it out after assembling the airplane. Contacted HL and they sent new servo extensions. No way to get them past the ducted fan and the extensions they sent are too short!
The EDF runs through a 2200mAh 4S pack in less than one minute! I've tried 4 different packs.
|
|
Write Your Own Review |
Read All Reviews...
|
Here's Everything You'll Need: Radio 1 - SPM5510 DX5e 5-Channel Transmitter/Receiver Only Mode 2 Motor Outrunner Brushless (2600 Kv) Included and installed in kit Speed Controller 45A Programable ESC pre-connected with Genuine Deans Ultra Conns. Included and installed in kit Battery 1 - TP22504SPP45 G6 Pro Performance 45C 5000mAh 5 Cell 18.5V LiPo 1 - WSD1300 Deans Ultra Connectors, pair Charger 1 - SRC403 40 Watt Balance Charger for 1-4 Lithium Cells
Please call our support line toll free: (866) 512-1444 for assistance with this product
|