Retractable and Main Landing Gear from Hobby Lobby!

Sturdy, Steerable Tailwheel Gear for airplanes of all sizes
Laser cut aluminum steerable tailwheel units, completely assembled. Include mounting screws and shock springs. The smallest unit weighs 1/4 oz. and is suitable for models up to 24 oz. The largest unit weighs 3 oz. and is suitable for airplanes up to 1/3 scale. Dimensions shown are approximate Total Height (Ground Clearance) x Length of Tail Strut. SCE018 Tailgear Assembly, 1-3/4"x2-1/2" with 3/4" Plain Wheel ..... $ 15.90 AVAILABLE NOW	SCE023 Tailgear Assembly, 2-1/4" x 3" with 7/8" Plain Wheel ..... $ 16.90 AVAILABLE NOW SCE040 Tailgear Assembly, 3-1/4" x 4-1/2" with 1-1/2" Deluxe Kavan Wheel ..... $ 25.90 AVAILABLE NOW SCE050 Tailgear Assembly, 4" x 5" with 2" Deluxe Kavan Wheel ..... $ 27.90 AVAILABLE NOW SCE062 Tailgear Assembly, 5" x 6-1/2" with 2-1/2" Deluxe Kavan Wheel ..... $ 32.90 AVAILABLE NOW

Inexpensive main landing gears
	RA1093 13" Main Landing Gear ..... $ 9.90 AVAILABLE NOW RA1094 16" Main Landing Gear ..... $ 9.90 AVAILABLE NOW Small one is about 2" high, large one about 4". Can be bent for more height and narrower tread.

Ultra lightweight steerable tailwheels for small models
	LYT6001 3/4" Foam Tailwheel Assembly ..... $ 4.40 AVAILABLE NOW LYT6002 5/8" Rubber Tailwheel Assembly ..... $ 4.20 AVAILABLE NOW LYT0011 5/8" Rubber Tailwheel Only ..... $ 2.00 AVAILABLE NOW

Install a tailwheel on your RC plane!
	RA1300 Complete Tailwheel Assembly ..... $ 4.70 AVAILABLE NOW Includes 1" diameter wheel. For almost any size RC airplane. The tempered wire is 1/16" which should give good support in models up to about 6 pounds. Instructions show how to install this on any airplane. Can be steerable, centering, or fixed.

Protect your plane’s finish--these mount either with screws or by gluing the shafts into holes
	RA1350 Mini Skids, 2 ..... $ 1.00 AVAILABLE NOW Mini skids are 1-1/4" long overall. RA1355 Large Skid ..... $ 1.00 AVAILABLE NOW Large skid is 2" long overall.

The name says it all!
	RA1072 Shock Absorbing Universal Steerable Nose Gear ..... $ 12.90 AVAILABLE NOW 5/32" (4mm) wire. 8-1/4" overall length. This is everything the name says it is: It absorbs up and down jolts with its tempered steel springs, it mounts in any .30 to .90 size airplane, it is steerable, and it comes assembled. Nose gear travels up and down on brass bushings.

Landing Gear, Tail Gear