LittleScreamers Micro Brushless Outrunner Motors from Hobby Lobby!

LittleScreamers Micro OUTRUNNERS

Little Screamers micro brushless power outrunner motors

Tremendous power in a tiny package

Scott Clark, the originator of LittleScreamers micro OUTRUNNER brushless motors has for years built and hand wound his motors, filling orders one at a time. The problem, Scott could not keep up with demand, take orders, answer emails and still have time to develop new products. Hobby Lobby and LittleScreamers have teamed up to solve these issues. LittleScreamers motors are now being produced so that demand can be met. LittleScreamers will be distributed exclusively through Hobby Lobby. Scott will now have the time to do what he does best - develop more micro brushless motors for other applications.

LittleScreamers are best known for their tremendous power output, exceptionally small size and light weight. Motors are 24mm diameter, 31mm deep, 25 grams (a little less than 1 ounce) including motor mount. Purple Peril and DeNovo motors have 3mm shaft with prop saver mount and two O-rings for prop attachment. Park Jet motor has 3mm shaft without prop saver attachment, 3mm prop adapter required. Order MJ4698 Ultralight collet prop adapter. Check out the motor mount for Little Screamers motors.

LittleScreamers "DeNovo"

LittleScreamers DeNove micro Outrunner brushless motor

1250 Kv (rpm/volt), 128 watts. Best for Parkflyers and 3D airplanes from 10-12 oz. flying weight. Use with 3 cell lipo battery capable of sustaining 11 amps. Prop range is from 6x5.5 to 9x5. With an 8x4 direct drive prop on 3 cells (11.1V) the motor will draw about 11 amps and deliver about 19 ounces of thrust. The CONTROLLER for DeNovo is JESAP12 - Jeti Advance PLUS 12 Amp Brushless Controller.

LittleScreamers "Purple Peril"

1550 Kv (rpm/volt), 165 watts. Perfect for 3D airplanes to 14 oz. and Slowflyers to 25 oz. Use with 3 cell lipo battery capable of sustaining 18 amps. Prop range is from 4.75x4.75 to 9x5. With an 8x4 direct drive prop on 3 cells (11.1V) the motor will draw about 16 amps and deliver about 22 ounces of thrust. The CONTROLLER for Purple Peril is JESAP18 - Jeti Advance PLUS 18 Amp Brushless Controller.

LittleScreamers "Super Park Jet"

Give your parkflyer jet the "afterburner" you've been looking for

2350 Kv (rpm/volt), 32 grams (1-1/8 oz.), 3mm shaft, up to 250 watts. Perfect motor for larger pusher prop jet models up to 30 oz. Ballistic performance in models under 20 oz. With 3 cells and a 7x5 APC-E prop, the motor will draw about 19 amps and deliver approximately 24 oz. of thrust. On 4 cells it will draw approximately 27 amps and deliver 36 oz. of thrust. (Note: this is only sustainable with excellent cooling). Includes firewall style mount. Prop range 5x5 to 7x5. Requires a 3mm prop adapter.

LittleScreamers "Park Jet"

2800 Kv (rpm/volt), 185 watts. High speed high performance motor for small high speed flying wings and park jets. Prop range is limited due to the High Kv rating of this motor. Special care must be taken to make sure that enough cool air gets to the motor. Use with 3 cell lipo battery capable of sustaining 20 amps. Prop range is from 4x4 to 6x5.5. With a 6x5.5 direct drive prop on 3 cells (11.1V) the motor will draw about 18.5 amps. Never static test this motor for more than 30 seconds. The motor will unload in the air and work well as long as cooling air is available. The CONTROLLER for Park Jet is JESAP18 - Jeti Advance PLUS 18 Amp Brushless Controller.

LittleScreamers "JetScreamer 1400"

BIG, powerful JetScreamer motor for 70mm fans - good to 1400 watts

4000 Kv (rpm/volt), 6 pole, weighs 5-3/4 oz., 5mm shaft with end turned to 3.2mm, 28.8mm dia. mounting flange, 33.75mm from face of mounting flange to face of motor, 35mm motor diameter. You love the small JetScreamer motor for its light weight and tremendous power, now you can have a new JetScreamer for bigger fans and higher power setups. Ideally suited for 70mm fans like the Wemotec Mini Fan 480 (WMF0013) or the 70mm fan that comes in the F5-E (requires a 3.2mm adapter). The motor adapter is pre-installed and the O-ring provides a shock dampening perfect fit in most 70mm fans. The adapter positions the motor behind the fan, directly in the airstream, providing great cooling that allows you to get tremendous power from this motor. The screw mount spacing is 16mm and 19mm to fit most stock 70mm fans. Use with 3-5 cells and a 44 to 90 amp controller.

LittleScreamers "JetScreamer 1490"

Powerful Outrunner for 90mm fans - produces over 7 pounds of thrust

1830Kv (rpm/volt), 12 pole, weighs 4-1/2 oz., 5mm shaft, 1400 watts. 38.5mm from face of motor to back of end bell, 35mm motor diameter. JetScreamer for 90mm fans on big jets with 5 or 6 cell batteries. Ideally suited for 90mm fans like the Wemotec Midi Fan (WMD0015). The screw mount spacing is 19mm and 25mm to fit most stock 90mm fans. Mounts with 3mm screws (not included). Use with 5-6 cell lipo packs and a 70 amp controller.

LittleScreamers "JetScreamer"

Lightest, most powerful small ducted fan motor you can buy

5100 Kv (rpm/volt), 38-1/2 grams (1-1/3 oz.) weight, 130-290 watts. Length of motor (face of mount to rear of motor shaft) is 31.5mm (1-1/4"), motor shaft is 3mm. High performance motor specially designed for use in small ducted fans. Has been tested in the ALF5101 59mm fan used in the Alfa Ta-183, MIG-15, and F-86 jets; requires slight modification of fan unit and the addition of fan rotor for 3mm shaft (ALF51013). In the Alfa fan the RPM is approximately 45,000 on a 3-cell Lithium battery while drawing 16 amps. Never static test this motor for more than 30 seconds. The CONTROLLER for Jet Screamer is JESAP18 - Jeti Advance PLUS 18 Amp Brushless Controller.

"JetScreamer" with Adapter

Motor with adapter for 56mm XF-Fan pre-installed

LittleScreamers JetScreamer ducted fan outrunner with adapter

4500 Kv (rpm/volt), 50 grams (1-3/4 oz.) weight, 190-450 watts. Total length of motor and adapter (face of mount to rear of motor shaft) is 54mm (2-5/16"). Adapter diameter is 21mm (13/16"), length without shaft is 22mm (7/8"), motor shaft is 3mm.

The MMC5156 motor has the 21mm adapter pre-installed and ready to assemble into the ETH550 56mm fan (available separately). The cooling is exceptional; the motor is completely exposed in the exhaust air of the fan. Motor will spin the fan at more than 40,000 RPM on a 3-cell Lithium battery and draw less than 14 amps. With a 4-cell battery the RPM is in the high 50,000 range. Never static test this motor for more than 30 seconds. The CONTROLLER for JetScreamer is JESAP18 - Jeti Advance PLUS 18 Amp Brushless Controller.

LittleScreamers Motor Mount

Super-light aluminum stick mount for motors with 8mm rear shafts

3/8" long, 8mm diameter shaft clamp, 3 gram total weight. Slips onto 10mm motor sticks and will mount all LittleScreamer motors (except MMC4000 & MMC5156) as well as any other motor with an 8mm rear mount shaft like the Potensky POTM030. Integral heat sink aids motor cooling.

Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948