Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft

Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft

E-flite's latest Park 370 is a brushless outrunner motor that features a 4mm hollow shaft, ideal for use with variable pitch propellers. It's perfectly designed for electric models equipped with variable-pitch propeller systems, such as the E-flite® ShowStopper VPP system. However, you don't need a VPP to use this motor-it's an excellent motor for small 3D airplanes that weigh 7-14 ounces. A motor mount, prop adapter and all hardware are included.

Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft Highlights:

• Ideal for models requiring up to 120 watts of power
• Optimized windings for 3D performance
• High-torque, direct-drive alternative to inrunner brushless motors
• Includes mount, prop adapters and mounting hardware
• 4mm hollow shaft is easily reversed for alternative motor installations
• Excellent motor for small 3D airplanes 7-14 oz (200-400 g)
• Extremely lightweight-just 1.6 ounces
• Ideal for variable pitch props such as the E-flite® Showstopper Variable Pitch Prop System
• External rotor design for better cooling
• High-quality construction with ball bearings

Needed to Complete: 12-20A brushless ESC, 2-3S Li-Po or 6-10 Ni-Cd/Ni-MH, 8x3.8-10x4.7 Slow Flyer Prop, Variable Pitch Prop option

Tech Notes: Maximum operating temperature: 220 degrees Fahrenheit. Adequate cooling is required for all motor operation at maximum current levels. Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required

Technical Specifications: Park 370 BL Outrunner,1200Kv with 4mm Hollow Shaft Specs: Type: Brushless outrunner Size: Park 370 Bearings or Bushings: One 4 x 8 x 4mm Bearing, and One 4 x 9 x 4mm Bearing Recommended Prop Range: 8x3.8-10x4.7 or Variable Pitch systems Voltage: 7.2-12V RPM/Volt (Kv): 1200 Resistance (Ri): .18 ohms Idle Current (Io): .60A Continuous Current: 10A Maximum Burst Current: 12A (15 sec) Cells: 6-10 Ni-MH/Ni-Cd or 2-3S Li-Po Speed Control: 12-20A Brushless Weight: 45 g (1.6 oz) Overall Diameter: 28mm (1.10 in) Shaft Diameter: 4mm (.16 in) hollow Overall Length: 25mm (1.00 in)

For technical support or warranty claims on this product, please contact Horizon Hobby at: (800) 338-4639