TAXI 2400 Model Airplane (OVERSIZE)

Taxi 2400 ARF Glow Conversion RC Model Airplane

94-1/4" wingspan, 68" long, 1628 sq. in. wing area, 18 pound flying weight. Airplane is laser cut built-up balsa and plywood construction. Cowl and wheel pants are fiberglass, landing gear is aluminum. Aluminum steerable tail wheel unit with pull-pull hardware, special flap hinges, pull-pull rudder controls and large spinner included. 2-piece wings have internally driven flaps and externally driven ailerons. The stabilizer is a 2-piece unit that assembles on an aluminum tube spar; each stab half has its own elevator servo. Designed for an OS Max 160 glow or G26 gas engine. For superior performance use an AXI 5330/24 OUTRUNNER. The power is amazing; sustained knife-edge passes are a breeze; just about any aerobatic pattern maneuver is possible. Conversion to electric is easy. Included is a full size drawing of the motor box that needs to be constructed. Flight times are 15 to 20+ minutes. Flaps slow the airplane for easy landings. Good for aero-towing large scale sailplanes. Clear instructions included. For 5 channels: Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder and Steerable tail wheel, and Throttle.

Radio
1 - SPM6600 Spektrum DX6i DSM2 6-Ch. Radio, AR6200 Rx, no servos
3 - HTS0635 HS-635 HB Hi Torque Servo
2 - HT0605 24" Aileron Extension w/Gold Pins
2 - HT0604 12" Aileron Extension w/Gold Pins
2 - HT0603 6" Aileron Extension w/Gold Pins
2 - HT0096 Hitec Aileron "Y" Connector
1 - HT00925 1800 mAh Receiver Nicad

Motor/Prop
1 - PM533024 AXI Gold 5330/24 Outrunner Motor
1 - PE21014E 21x14E Thin Electric Prop

Motor Controller
1 - JAP90P Advance Pro 90 Amp Opto Brushless Motor Controller
1 - JAP01 Jeti Advance Pro Program Card * optional

Battery
2 - TP50005SPL2 5 Cell 18.5V 5000 mAh Pro Lite V2 20C

Charger
1 - SRC506 iC6 LiPlus Intelligent Balance Charger

Accessories
Glue, Solder, Connectors, etc.