Wheels, Axles and an Electric Brake from Hobby Lobby!

Ultra-light, incredibly strong aircraft wheels designed for Electric Flight

Model airplane wheels

Two conflicting needs for electric flight wheels: they must be extremely lightweight, but they must also be strong because the heavy batteries in electric airplanes put great pressure on landing gear and wheels. "LYT" wheels are made of an unusual foam which is extremely light but which only compresses ten percent under a ten pound load. We know of no other lightweight wheels which can support a heavy electric airplane yet withstand the stress that a heavy airplane puts on them.

These are not just wheels - these are REALS!

Model airplane wheels

Reals have the most realistic tires you’ve ever seen in a model airplane wheel. The amount of "squash" is realistic. The "rubber" (it’s not, really, it’s a vinyl compound) has realistic traction — they’re not shiny and slippery plastic. The sizes through 3" are narrow and have lower air drag. They are light weight (for reference to others: 2" - .5 oz.; 3"- 1.25 oz., 4"- 2.5 oz. each). Here’s the kicker: They’re cheaper than other wheels! Compare the prices!

Lower prices! Our extra lightweight wheels

Model airplane wheels

These are our lightest wheels. Here are some weights for reference: 2" - .42 oz, 3" - .89 oz., 4" - 2.06 oz. each. Even though they are light these are very durable and will support heavy model airplanes. Made by Kavan in Germany. These have very scale-like tread designs.

The ultimate Super Light BIG scale airwheels! Now up to 6" diameter

Model airplane wheels

Have air valve so you can change pressure with an air pump. Chrome plated hubs are two piece so you can hide a wheel collar inside. These are VERY strong and will support heaviest airplanes. But they are very light -- from 1.8 oz to 3.5 oz. each. 6mm axle holes can be drilled to 1/4" or shimmed with 7/32" brass tubing (KSN130) to 3/16" axle.

Lightweight foam wheels for Alfa Spitfire

Lightweight foam wheels for RC airplanes

Lightweight wheel set designed for the ALF215 Alfa Spitfire. Includes two, 47mm diameter, 13mm wide lightweight foam wheels and a 20mm diameter, 5mm wide tail wheel.

Ultra light pre-painted plastic scale wheels for slowflyers

Model airplane wheels

Sturdy, Steerable Tailwheel Gear for airplanes of all sizes

Carbon fiber landing gear for RC airplanes

Laser cut aluminum steerable tailwheel units, completely assembled. Include mounting screws and shock springs. The smallest unit weighs 1/4 oz. and is suitable for models up to 24 oz. The largest unit weighs 3 oz. and is suitable for airplanes up to 1/3 scale. Dimensions shown are approximate Total Height (Ground Clearance) x Length of Tail Strut.

Axles

Model airplane axles

2" long. Tempered steel, use 5/32" wheel collars. Drill a 5/16" hole in your aluminum or (up to 1/4" thick) fiberglass landing gear legs.

Electric Brake

Strong electric brake for Kavan’s BIG Scale Airwheels

Model airplane brake

About 1.5" diameter. Use a 9v transistor radio battery and a micro switch that’s hit by "down" elevator servo movement. Braking is strong -- a single brake on nose wheel gives good stopping. Two on main wheels are even stronger. 6mm axle hole can be drilled to 1/4" or shimmed with 7/32" brass tubing (KSN130) to 3/16" axle.

Wheels, Axles, Brake