Z-Bend Coupler for 5/64 Wire, pack of 10

Do you want to know the best way to hook up a pushrod with clevises, threaded couplers, and pushrod connectors? Don't!

Z-Bends are the best way to connect a servo output to a pushrod. Z-Bends are the best way to connect the other end of a pushrod to the control surface's control horn. You solder these ready-made Kavan Z-Bend Couplers to a music wire. If you judged the length wrong, melt the solder and move the Z-Bend Coupler. The ends are 1.5mm diameter which fits the holes in servo arms and control horns exactly.