Pilot-1 Stinson 108 Blue/Cream 1/8 Scale ARF

Golden Age Classic, easy to build, transport and fly

50-3/4" wingspan, 38-1/2" long, 345 sq. in. wing area, 41-1/2 oz. flying weight (with 7.4 oz. battery). True to scale classic for those who love elegant design and gentle handling. All laser-cut balsa and ply construction accurately pre-assembled and pre-covered in genuine Oracover.

Has attractive scale details that make this handsome aircraft stand out at the flying field. Fiberglass engine cowl with chrome-look air intake grills, and fiberglass wheel pants. Aluminum landing gear with airfoil covering and plastic fairings that blend to the fuselage. Pre-built and covered wing struts. Wings slide onto carbon wing tube and are held in position by a screw tab. Airplane can be built with either one or two elevator servos (2 elevator pushrods included) and uses pull-pull rudder control; each aileron has its own servo.

The clearly written photo-illustrated instruction manual shows each assembly step and offers valuable setup information for successful flying. Removing the bottom hatch (no tools required) easily accesses the battery. Flight times in excess of 15 minutes are easily possible. Requires a 4-channel radio system; we recommend a computer radio system with end point adjustments and the ability to have rudder-aileron mixing and differential aileron adjustments.

The 1/8 Scale Pilot-1 Stinson is also available in a Red & Cream color scheme.

Radio
1 - SPM6600 DX6i Full Range Transmitter, AR6200 Receiver, no servos
4 - HTS055 Hitec HS-55 Sub Micro Servo
2 - HT0097 Hitec 12" Aileron Extension

Motor/Prop
1 - PM281416 AXI Gold 2814/16 Outrunner Brushless Motor
1 - PM280802 Radial Mount Set for AXI 28 Series Motors
1 - PE10070E 10x7E Thin Electric Prop

Motor Controller
1 - JAP30 Jeti Advance Pro 30 Amp Brushless Speed Control

Battery
1 - TP21003SPL2 Pro Lite V2 3 Cell 2100 mAh 11.1V LiPo

Charger
1 - SRC506 iC6 LiPlus Intelligent Digital Balance Charger

Accessories
Glues, Solder, Connectors, etc.