3 Amp Switch Mode BEC

Switching BEC with selectable 5 or 6 volt output

This highly efficient (>90%) switch mode BEC can provide a constant 5 or 6V (selectable by you) to your receiver with flight batteries of up to 6 cells (26V). If you are using this with an ESC with BEC function you will need to disable the ESC's BEC by disconnecting the red wire from the ESC. The switch mode BEC is enclosed within a metal shield to reduce possible electromagnetic interference. Compact in size and easy to install this unit provides a lot of peace of mind by reliably providing power to you radio receiver and servos. The input wires on the BEC will have to be soldered to the input wires from your ESC to receive the power from your flight batteries.

Technical Specifications: 3 Amp Switch Mode BEC Specs: Input Volts: 5V-25.2V (up to 6S Lipo) BEC Output: 3A continuous 5A peak Output: 5V/6V switchable Weight: 15g (with wires) Dimensions: 1-3/8 in. x 3/4 in. x 3/8 in.