A-10 Warthog Twin Ducted Fan Jet

Scale Warthog for twin JetScreamer motors and XF-Fans

39-1/4" wingspan, 34-3/4" long, 203 sq. in. wing area, 34 oz. flying weight. Terrific looking jet, all molded hollow foam construction, pre-painted in matte finished camouflage colors. Tremendous amount of detail: full cockpit interior, scale landing gear for static display, full set of bombs and rockets, and complete scale waterslide decals. Two of our 56mm "XF-Fan" units with two JetScreamer motors make the perfect power package for this jet, providing tremendous thrust for powerful flight performance. Jet can be hand launched and landed on its belly; the main wheels extend below the airplane which protects the bottom. This is a kit for the experienced modeler who enjoys building and flying scale models. The assembly time takes between 20 - 40 hours depending on the degree of finish. Minimum 3 channel radio required: Ailerons (2 servos), Elevator, Throttle.

Radio
1 - SPM6600 DX6i 6-Ch. Transmitter, AR6200 Receiver, no servos
3 - HTS055 Hitec HS-55 Servos
2 - HT0097 Hitec 12" Servo Extension

Motor/Prop
2 - MMC5156 LittleScreamers "JetScreamer" OUTRUNNER w/21mm Adapter
2 - ETH550 EDF 60/15 Mk. 2 Electric Ducted Fan

Motor Controller
2 - ABC20 Black 20 Amp Brushless Controller
2 - MJ21011 1.8mm Gold Connectors

Battery
1 - PQ25003 Twenty-Five 3 Cell 11.1V 2500 mAh LiPo

Charger
1 - ETC2500 LiPoly Smart Charger for 1-4 Cells
1 - ETC505 2-5 Cell LiPoly Smart Balancer & Charge Guard

Accessory Pack
1 - FSK036AP Accessory Pack for A-10 Warthog
Includes: Glue, Solder, Connectors, etc.