A-7 Corsair II ARF RC Jet

32-1/4" wingspan, 36-3/4" long, 240 sq. in. wing area, 30-1/2 oz. flying weight. The 70mm fan with its outrunner motor on 4 lithium polymer cells propels the big A-7 with power and speed. Handlaunches are a breeze; the airplane has an easy to grip fuselage, just a firm toss and off you go. Assembly is quick as all of the tough steps have been pre-done. Tail surfaces must be glued to the fuselage and connected to the pre-installed servos. The main wing has carbon tube reinforcements and must be screwed in place on the fuselage after connecting the aileron servos to your receiver. By the time you have the included 2200 mAh 4-cell battery charged, you should be ready to fly. The CG is set automatically when you install the battery in the battery compartment under the canopy. This airplane is handlaunched and lands on its belly, great for those who don't have a paved runway to fly from. Airplane comes pre-painted with the water slide decals pre-applied. Ducted fan and motor unit is easily accessible through a hatch in the bottom of the fuselage. This is a 4 servo airplane: 2 for ailerons and 2 for elevators. Check out our web video for a great demonstration of the easy handlaunch and great flight characteristics of the A-7 Corsair II. A bare airframe version of the A-7 is available below.

Here's how it comes out of the box