Advance PLUS Program Card

The Programming Card for all the Advance PLUS controllers

1-1/2 x 1-1/2 x 1/16" card with jumper connectors programs all of the Advance PLUS controllers in 6 different ways: Accept Nicads or NiMh or Lithium cells; Set a High or Low motor cutoff voltage; Set a Hard cutoff or a gradual slowdown; Set Brake or No Brake; Set Timing for Regular Brushless motors or for Outrunner motors; Set Throttle response either Linear or Logarithmic. If you do NOT use the Program Card, then the Advance PLUS Controllers can only be programmed as the Jeti Advance Controllers were: Brake On or Off, Hard (Outrunner) or Soft timing.