Aileron Pushrod Fairings, pr.

Aileron Pushrod Fairings, pr.

These are drag-reducing fairings for the pushrods to any control surface - ailerons, elevator, flaps, rudder, speedbrakes, spoilers. The flat base of the pushrod fairing is 5" long overall. The forward part of the base is molded with a downward bend so it won't pull up in the airplane's slipstream. The fairing itself is about 3-3/4" long and 5/8" high. Cut off the aft end of the Fairing to make the Fairing any length you want. One is shown cut off in the photo. The Fairings are molded of ABS plastic which can be glued or screwed down over the servo's output arm.