Balance charges 1-6 Lithium cells at up to 5A |
5-5/8" x 3-3/8" x 1-3/8". Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs. NOTE: when balance charging Lithium batteries, both the balance tap and the main power wires must be connected to the charger. B6-Pro Instruction Manual PDF
B6-Pro Includes:
Internal independent lithium battery balancer: Employs an individual-cell-voltage balancer to maintain your pack in balance while charging.
Balance individual cells during discharge: During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal.
Fast and Storage mode charging: "Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack.
Charges various types of LiPoly cells: Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types.
Data store/load: Up to 5 batteries' data can be stored for easy programming.
Cyclic charging/discharging: 1-5 cycles of either charge>discharge or dischage>charge is possible.
B6-Pro Specs: - Operating voltage range: DC 11.0~18.0 Volt
- Circuit power: Max. charge power 80W
- Charge current range: 0.1~5.0A
- Discharge current range: 0.1-2.0A
- Current drain for balancing Li-po: 300 mAh/cell
- NiCd/NiMH battery cell count: 1-15 cells
- Li-ion/Polymer cell count: 1-6 series
- Pb battery voltage: 2V, 20V
This seems to be a very high quality charger. I have charged just about everything pertaining to rc.
I bought it to balance my Li-Po batteries because I was just using a regular Li-Po charger and I wondered
if I was charging the cells correctly. It comes with a lot of high quality adapters but they forget to tell you
one thing. You can't plug your balancing plug from your battery into the port on the charger! I drove to my
LHS and picked up a set of adapters from E-Flight for about 10 bucks. If I had known you needed adapters
I would have ordered the TP/FP Adapter set (product #SCR510 ) from Hobby-Lobby when I ordered the charger.
They have several different balance port adapters for different types of Li-Po batteries. It has become my #1
charger because it will charge so many different things and it has readouts so you can tell what is happening while
it is working. Even after having to buy the adapters I still gave it a top rating. It's a nice product!
|
|
Read All Reviews...
|
Please call our support line toll free: (866) 512-1444 for assistance with this product |
Cart Items 0
FAQs
