Scale twin - flies great on two geared Speed 300's
40-3/8" wingspan, 28-1/2" long, 248 sq. in. wing area, 22 oz. flying weight. Lightweight hollow molded foam construction with all of the painting pre-done. Beautifully engineered for easy assembly and great flying performance. Flies very well on inexpensive geared Speed 300 brushed motors or can be upgraded to brushless power. Includes water-slide decals representing 5 different authentic aircraft markings. Airplane is easy to launch, it has a good grip area behind the wing and all it takes is a light toss at about half throttle. Landings on its belly are easily done and the plastic reinforcements keep the wear to a minimum. Flight times are in excess of 10 minutes with lots of aerobatics possible. The basic setup is for 3 channels: aileron (2 servos), elevator and throttle. The instructions detail how to add a functional rudder, flaps and even
retractable landing gear (additional parts and servos are required).
Here's Everything you'll need:
Radio
1 -
SPM5500 DX5e Full Range Transmitter, AR500 Receiver, no servos
3 -
HTS055 Hitec HS-55 Servos
1 -
HT0096 Hitec Aileron "Y" Connector
Motor/Prop
2 -
SK400XT Esskay 400XT Outrunner Brushless Motor
2 -
P09060SF 9x6 Slowflyer Prop
2 -
MJ8030 Prop Adapter for 3mm Shaft
Motor Controller
2 -
JESAP18 Jeti Advance PLUS 18 Amp Brushless Controller
1 -
JESAP01 Jeti Advance PLUS Program Card
* optional
Battery
1 -
PQ15003 Twenty 3 Cell 11.1V 1500 mAh LiPo
Charger
1 -
SRC506 IC6 Balance Lipo Charger
1 -
SRC513 PQ/HP Adapter for IC6 Charger
Accessories
1 -
ALF213AP Accessory Pack for "Bristol Beaufighter"
Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Intermediate