![]() |
MP Jet "AC" Outrunner Brushless Motors
|
| Home | Brushless Outrunners | |
| Tiny 17 gram motors for models under 8 oz. | |
![]() |
27mm (1-1/16") diameter, 17 grams, Kv=1300. Small and light, this motor is ideal for flying airplanes up to 200 grams (7 oz.) with a 2-cell LiPo battery. Suitable for propellers from 7x3 to 8x4. Short-term max current is 3.5 amps. Motor comes with built-in motor mount and attachment screws. Propeller adaptors and M2 prop screw included. Use MJ21011 connectors to connect to your controller. COMBO: Order your MJ20206 with a Jeti 4 amp brushless controller and SAVE! |
![]() |
27mm (1-1/16") diameter, 17 grams, Kv=2800. Small and light, this motor is ideal for flying airplanes up to 200 grams (7 oz.) with a single LiPo cell. Suitable for propellers from 7x3 to 8x4. Short-term max current is 8 amps. Motor comes with built-in motor mount and attachment screws. Propeller adaptors and M2 prop screw included. Use MJ21011 connectors to connect to your controller. COMBO: Order your MJ20207 with a Jeti 4 amp brushless controller and SAVE! |
![]() |
27mm (1-1/16") diameter, 17 grams, Kv=1880. Small and light, this motor is ideal for 3D airplanes up to 100 grams (3.5 oz.) or aerobatic airplanes to 150 grams (5-1/4 oz.) with a 2-cell LiPo battery. Suitable for propellers from 6x4 to 7x4. Short-term max current is 7 amps. Motor comes with built-in motor mount and attachment screws. Propeller adaptors and M2 prop screw included. Use MJ21011 connectors to connect to your controller. COMBO: Order your MJ20208 with a Jeti 8 amp brushless controller and SAVE! |
![]() |
|
| Small light outrunners - great for 3D models to 11 oz. | |
![]() |
1-1/16" diameter, 1-3/16" long (from prop back plate to firewall mounting surface), 3mm prop shaft, .9 oz. Use with 3 lipoly cells, and APC props from 7x4 to 9x6. Maximum efficiency at 5 amps with peaks to 8 amps. To attach the motor to your speed control order MJ20221 motor wire set. COMBO: Order your MJ20204 with a Jeti 8 amp brushless controller and SAVE! |
| Brushless replacement for any MP Jet SPEED 300 Geardrive | |
| Perfect for any model that is designed for the MP Jet Speed 280/300 gearboxes (Hobby Lobby numbers MJ8000 series) and these have exactly the same screw layout as the MJ8000 gearboxes. Even the distance from the firewall to the prop adapter as well as the centering of the shaft will be unchanged. A quick boost in performance for your Alfa warbird or other aerobatic model to 18 oz. or powered sailplane to 27 oz. | |
![]() |
1-3/8" diameter, 1-5/16" deep, 3mm prop shaft, 2 oz. Use with 7-10 Nicad or NiMh cells, or 3 cell Lithium Polymer pack and an APC prop from 7x3 to 10x4.7. 950 RPM/Volt. Maximum efficiency at 8 amps with peaks to 12 amps. To attach the motor to your speed control order MJ20221 motor wire set. Great with 3 cell Li-Poly pack and 9x6 prop. COMBO: Order your MJ20202 with a Jeti 18 amp brushless controller and SAVE! |
![]() |
1-3/8" diameter, 1-5/16" deep, 3mm prop shaft, 2 oz. Use with 6-9 Nicad or NiMh cells, or 2-3 cell Lithium Polymer pack and an APC prop from 7x3 to 10x4.7. 1100 RPM/Volt. Maximum efficiency at 15 amps with peaks to 20 amps. To attach the motor to your speed control order MJ20221 motor wire set. Great with 2 cell Li-Poly pack and 9x6 prop. COMBO: Order your MJ20203 with a Jeti 18 amp brushless controller and SAVE! |
Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948
Copyright © 1996-2008 Hobby Lobby International, Inc. All Rights Reserved.