Cularis Electric RC Glider (OVERSIZE)

Beautiful "Full-House" motorized sailplane thermals in the lightest lift

102-3/4" wingspan, 49-1/2" long, 853 sq. in. wing area, 3 lbs. 7 oz. flying weight. Fuselage and wings are made of "Elapor" (tough expanded bead foam) for strength and durability. Wings and tail are removable, unique push button connectors hold the flying surfaces securely but unsnap for easy transport and storage. Includes wing assembly jig. The suggested motor, prop and battery will provide nearly a dozen strong climbs to thermal altitudes. Battery access is through the canopy. The ailerons and flaps have independent servos. This is a "Full-House" thermal duration sailplane and can be programmed for all of the functions that this type of sailplane uses: full span camber (for better climb in thermals), full span reflex (to speed out of sinking air), crow (ailerons up and flaps down). Can also be built as a pure (non-powered) sailplane and includes a nose with a place for an aero-tow nose release. Great instructions included. Best for intermediate to experienced builders. For 7 channels: Ailerons (2 servos), Flaps (2 servos), Elevator, Rudder and Throttle.

Radio
1 - SPM2710 DX7 DSM2 7-Ch., AR7000 Rx, 4-DS821 Digital Servos
2 - HTS081 Hitec HS-81 Sub Micro Servo
4 - HT0097 Hitec 12" Servo Extension
2 - HT0099 Hitec 6" Servo Extension
2 - HLAE320 24" Extension for Hitec/JR

Motor/Prop
1 - PM282012 AXI Gold 2820/12 Outrunner Motor
1 - HLAN5150 50mm Spinner (2")
1 - HLAN4224 52mm Middlepart Yoke for 50mm spinner
1 - HLAN3458 13x6.5 Carbon Fiber Cam Blade
1 - HLAN2409 5mm Prop Shaft Adapter

Motor Controller
1 - JAP40 Advance Pro 40 Amp Brushless Motor Controller
1 - JEP01 Jeti Advance Pro Program Card * optional

Battery
1 - TP21003SPL2 3 Cell 11.1V 2100 mAh Pro Lite V2 20C LiPo

Charger
1 - HT9253 Multicharger LiPo/Ni Charger

Accessories
Glue, Solder, Connectors, etc.