Easy to fly - flies for hours in the lightest lift |
72" wingspan, 44" long, 645 sq. in. wing area, 34 oz. flying weight (electric), 29 oz. flying weight (glider). The EasyGlider PRO is an updated model based on the popular and proven EasyGlider and EasyGlider Electric. Just like the larger Cularis, the Easy Glider PRO can be built as a pure glider or as an electric by adding the optional power pack. The Easy Glider PRO's flying characteristics are perfect for the beginner, although this by no means implies that the more advanced pilot won't enjoy it - quite the contrary. If you are an expert you will soon discover that the EasyGlider PRO has the kind of performance only seen with much larger and more expensive gliders. The EasyGlider PRO has a low sink rate, it can be ballasted to expand the airspeed range, and has a landing aid where both ailerons can be raised to slow it down. Made of pre-fabricated molded ELAPOR parts. Two-part wing with removable spar joiner for easy transportation has a convenient method of aileron servo connection when the wings are fitted to the fuselage. Reccomended Equipment: Motor - 200 to 300 Watt 36mm Outrunner, Speed Control - 25 to 37 Amp, Propeller - 12 x 6, Battery - 2S 3200 mAh LiPo, Servos - (2) HS-82HD and (2) HS-55, Receiver - Mini 6S or Micro 05S. Technical Specifications: | Length: | 44" | | Wingspan: | 72" | | Flying Weight: | 34 oz. (electric), 29 oz. (glider) | | Controls: | Ailerons, Elevator, Rudder, Throttle | | Wing Area: | 645 sq. in. |
|
First flight; soared with hawks and caught a thermal. What more could you ask?
Easily built and flies well. Other than the cockpit gets a bit cramped for space, I can think of nothing negative to say.
|
Great electric glider for beginners, easy to upgrade the stock motor once you want more power and easy to fix after a crash.
|
The Mulitplex Easy Glider Pro is a great design that is perfectly manufactured in Elapor foam. It goes together easily with excellent results, and the fit and finish of the kit shows in every aspect. Modifications to accommodate a particular lipo, receiver configuration, ESC, etc are easy to make with the Elapor foam, and the motor mount is sturdy and reassuring even with oversized outrunners. The Elapor foam is sturdy and resilient in a crash, and easy to repair if it breaks. The glider looks great on the ground and even better in the air. It has a wide speed range, though it does best at the lower end. It responds well to inputs and can stay up for long periods of time even when motoring around in low or no lift. The Easy Glider Pro is a well-designed glider that will keep flying despite abuse and provide hours of fun on the building table and in the air.
|
|
Read All Reviews...
|
Here's Everything you'll need:
Radio
1 - SPM6610 DX6i 6 Ch Full Range w/o Servo MD2
Battery
1 - YTB32002 2-Cell 7.4V 3200mAh 20C LiPo Pack
1 - WSD1300 Deans Ultra Plug Connector, pair
Charger
1 - SRC400 40 Watt Lipo Balance Charger for 1-4 Lithium Cells
For technical support or warranty claims on this product, please contact Hitec at: (858) 748-8440
|
Cart Items 0
FAQs
