Parts
for ECO 8 Radio Controlled
Electric Helicopter
Electric Helicopter
|
Parts
for ECO 8 Radio Controlled
Electric Helicopter |
| Home | ECO 8 | ECO 8 Upgrades | |
|
4x4x4
Shipping for $3.99
If your helicopter parts order is less than $250 and will fit in our 4"x4"x4" box, we will ship your order anywhere in the world for $3.99! Select "Standard Ground" as your shipping choice and we will do the rest! |
|
Hobby
Lobby will NOT be undersold!
Low Price Guarantee! |
| IK675CRP | CRASH KIT: MAIN GEAR, TAIL BOOM, TAIL ROTOR SHAFT, BLADE BRG. SHAFT, 10% OFF REGULAR PRICE | $ 35.00 | |
| IK001IN | INSTRUCTION BOOKLET | $ 9.80 | |
| IK67509 | BLADE BEARING SHAFT 4x66 | $ 8.80 | |
| IK67511 | BLADE HOLDER, 2 | $ 17.30 | |
| IK67513 | TAILROTOR PUSHROD 700mm | $ 2.80 | |
| IK67517 | CHASSIS, 2 | $ 24.05 | |
| IK67518 | DECALS | $ 9.75 | |
| IK67520 | SERVO SPACER 3&5mm, 4 | $ 4.10 | |
| IK67521 | UPPER BEARING CASE | $ 4.65 | |
| IK67523 | CLEVIS, 5 | $ 2.00 | |
| IK67526 | TIE-ROD M2x160, 2 | $ 2.80 | |
| IK67527 | TIE-ROD M2x12, 2 | $ 2.30 | |
| IK67530 | TIE-ROD M2x99, 2 | $ 2.50 | |
| IK67531 | TIE-ROD M2x52, 2 | $ 2.30 | |
| IK67532 | M2x33 THREADED ROD, 2 | $ 2.30 | |
| IK67533 | M2x72 THREADED ROD, 2 | $ 2.30 | |
| IK67534 | M2x8 THREADED ROD, 2 | $ 2.30 | |
| IK67536 | MAIN GEAR | $ 16.85 | |
| IK67540 | TAILBOOM SUPPORT, 2 | $ 9.30 | |
| IK67541 | PITCH LEVER | $ 5.30 | |
| IK67542 | BLADE HOLDER-TAILROTOR, 2 | $ 8.95 | |
| IK67543 | TAILROTOR LEVER W/BUSHING | $ 6.20 | |
| IK67546 | SPACER | $ 1.45 | |
| IK67547 | TAIL ROTOR BLADES, 2 | $ 9.80 | |
| IK67548 | TAIL ROTOR HOUSING | $ 18.95 | |
| IK67549 | TAILROTOR HUB | $ 9.70 | |
| IK67550 | TAIL ROTOR SHAFT | $ 4.00 | |
| IK67551 | TAIL DRIVE BELT ECO 8 | $ 9.30 | |
| IK67554 | M2.5x8 CH SCREW, 4 | $ 5.05 | |
| IK67555 | M3x25 CH SCREW, 10 | $ 3.00 | |
| IK67556 | M3x5 CH SCREW, 10 | $ 2.00 | |
| IK67557 | CANOPY HALVES, 2 | $ 22.45 | |
| IK67558 | CLEAR CANOPY LExAN | $ 12.40 | |
| IK67562 | SKID STRUTS, 2 | $ 18.55 | |
| IK67563 | ALUMINUM SKID TUBES, 2 | $ 4.95 | |
| IK67565 | BALL-LINK LONG, 20 | $ 9.30 | |
| IK67566 | BALL BEARING 2x6x3mm, 2 | $ 13.40 | |
| IK67567 | BALL BEARING 3x7x3mm, 2 | $ 13.40 | |
| IK67569 | BALL BEARING 4x11x4mm, 2 | $ 13.40 | |
| IK67570 | BALL BEARING 6x12x3mm, 2 | $ 13.40 | |
| K67572 | TAILGEAR CHASSIS | $ 13.40 | |
| IK67574 | M3x4 SET SCREW, 10 | $ 1.75 | |
| IK67575 | MIXER BODY | $ 17.50 | |
| IK67577 | 90 DEG LEVER W/BUSHING | $ 5.30 | |
| IK67578 | MIXER LEVER W/BUSHING | $ 11.75 | |
| IK67580 | MAIN GEAR BRACKET | $ 17.50 | |
| IK67584 | MAIN GEAR HUB FOR AR | $ 30.45 | |
| IK67585 | MAIN GEAR HUB NON-AR | $ 21.65 | |
| IK67588 | O-RING (FOR BLADESHAFT), 4 | $ 2.50 | |
| IK67589 | FLYBAR PADDLE, 2 | $ 9.50 | |
| IK67590 | CENTER HUB | $ 8.25 | |
| IK67591 | ARM W/ BUSHING, 2 | $ 9.60 | |
| IK67592 | R/C PLATE, 2 | $ 17.00 | |
| IK67593 | TAIL DRIVE PINION 35T | $ 9.45 | |
| IK67594 | TAIL DRIVE PINION 40T | $ 10.30 | |
| IK67595 | TAIL DRIVE PINION 45T | $ 11.95 | |
| IK67597 | RUBBER SKID TUBE, 4 | $ 1.00 | |
| IK67598 | M2x14 CH SCREW, 2 | $ 2.50 | |
| IK67599 | M2x16 CH SCREW, 2 | $ 4.95 | |
| IK67600 | M2x10 LH SCREW, 20 | $ 2.20 | |
| IK67601 | M2x12 LH SCREW, 20 | $ 2.20 | |
| IK67602 | M2x30 LH SCREW, 10 | $ 3.60 | |
| IK67604 | M3x10 CH SCREW, 20 | $ 2.00 | |
| IK67605 | M3x8 CH SCREW, 20 | $ 2.00 | |
| IK67606 | VERTICAL FIN | $ 9.55 | |
| IK67608 | SEESAW LEVER, 2 | $ 9.60 | |
| IK67610 | FLYBAR SEESAW | $ 11.35 | |
| IK67611 | PINION 12T 3.2mm | $ 4.95 | |
| IK67613 | PINION 14T 3.2mm | $ 4.95 | |
| IK67614 | PINION 15T 3.2mm | $ 4.95 | |
| IK67615 | PINION 16T 3.2mm | $ 4.95 | |
| IK67616 | PINION 17T 3.2mm | $ 4.95 | |
| IK67618 | PINION 19T 5mm | $ 6.40 | |
| IK67619 | PINION 20T 5mm | $ 6.40 | |
| IK67620 | PINION 21T 5mm | $ 6.40 | |
| IK67622 | PINION 23T 5mm | $ 6.40 | |
| IK67623 | PINION 24T 5mm | $ 6.40 | |
| IK67624 | MAINSHAFT COLLAR 6x16x5mm | $ 5.05 | |
| IK67625 | 2x10mm PIN, 3 | $ 2.20 | |
| IK67631 | WASHER 3mm, 20 | $ 2.50 | |
| IK67632 | WASHER 4mm, 20 | $ 2.50 | |
| IK67635 | Y-ARM, 2 | $ 8.35 | |
| IK67636 | SHAFT FOR Y-ARM, 4 | $ 2.05 | |
| IK67639 | ROTOR CENTER UNIT | $ 19.05 | |
| IK67640 | TRANSMISSION SHAFT 3x64mm | $ 3.80 | |
| IK67645 | TAIL BEARING SET (NEW) | $ 20.80 | |
| IK67701 | SWASH PLATE COMPLETE | $ 40.50 | |
| IK67702 | TAIL DRIVE PULLEY | $ 8.45 | |
| IK67920 | TAIL DRIVE BELT FOR ECO 16 | $ 9.30 | |
| IK67964 | PINION 14T 5mm | $ 4.95 | |
| IK67965 | PINION 15T 5mm | $ 4.95 | |
| IK67966 | PINION 16T 5mm | $ 4.95 | |
| IK67967 | PINION 17T 5mm | $ 4.95 |
Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948
Copyright © 1996-2008 Hobby Lobby International, Inc. All Rights Reserved.
