Lightweight easy to fly parkflyer - motor and gearbox included!
33-1/2" wingspan, 25-1/2" long, 215 sq. in. wing area, 10 oz. flying weight. Simple airplane with full fuselage and hollow wing made from sheet foam. SPEED 300 motor, gearbox, prop and prop adapter included . Two servos are required, one for the ailerons and the other for elevator, rudder is fixed. Easy to hand launch and fly, capable of loops and rolls, and any maneuver except those that require rudder. Will take off from the ground into a light breeze, landing gear is wide and the wheels large enough for short grass. Assembly is easy enough for the novice, and photo-illustrated instructions are provided. For 3 channels: Ailerons, Elevator and Throttle.
Here's Everything you'll need:
Radio
1 -
HTR48725 Hitec Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos
Motor/Prop
Motor, Gearbox, Prop, Prop Adapter all included with airplane!
Motor Controller
1 -
JES006 6 Amp Microprocessor Motor Controller
1 -
BAT229 JST Connector Lead for Battery Packs
Battery
1 -
YTB08002 Power Wing 2 Cell 7.4V 800 mAh 20C LiPo
Charger
1 -
ETC2020 Smart Charger for 1-3 Li-Poly Cells
1 -
BAT228 JST Connector Lead for Charger
Accessories
Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Beginner