eRC Electronic Programmer

Jason Says:

"If you have an eRC speed controller, you simply must get one of these programmers. It's the best way to program a speed controller to date."

The best way to program your eRC ESCs

The eRC Electronic Programmer is the fastest and simplest way to program your eRC speed controllers from anywhere. It's small and light so you can carry it in your field or transmitter box. All the menus and values are printed right on the front and back case, so you always know what the settings are. All you need to do is plug up the ESC's receiver lead to the programmer and power the ESC with your flight battery. Adjust the settings using the buttons on the programmer and unplug the flight battery when you're done. Re-connect the ESC to your receiver and go fly. It really is that simple.