Incredible quality - fantastic aerobatic airplane is a work of modelbuilding art!
63" wingspan, 46" overall length, 639 sq. in. wing area, 90 oz. flying weight. Best quality pre-built airplane we've seen. Amazing quality: the fiberglass cowl is pre-painted in three colors; the light and strong built up balsa and ply wings with the ailerons pre-installed; each hinge pinned for strength. The covering is quality heat shrink film with each color a separate piece (not preprinted film). The fuselage is conventional wood construction with the motor mount and pushrods pre-installed, the landing gear hardware and the wing mounting hardware are pre-installed, and the entire fuselage is covered and the pilot and canopy installed. You can also fly Extra 300 with a glow engine.
Here's Everything you'll need:
Radio
1 -
HTR8721 Optic 6 with Supreme Receiver, 4 HS-325HB Servos
1 -
HTS0422 Hitec HS-422 Servo
Motor/Prop
1 -
PM413016 AXI Gold 4130/16 Outrunner Motor
1 -
PM41002 Radial Mount Set for AXI 41 Series Motors
1 -
PE15080E 15x8E Thin Electric Prop
Motor Controller
1 -
JESAP77P Advance PLUS 77 Amp Opto Brushless Motor Controller
1 -
JESAP01 Jeti Advance PLUS Program Card
* optional
Battery
2 -
TP50003 Pro Power 3 Cell 5000 mAh 11.1V LiPo
Charger
1 -
GR6412 Graupner Ultramat 12 Automatic Charger
1 -
PC001E Charger Lead with Deans Ultra Connector & Banana Plugs
1 -
DEA1302 Deans Ultra Plug, Male, pair
1 -
DEA1303 Deans Ultra Plug, Female, pair
Accessories
Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Intermediate