Extra 300S Elektro ARF

Lightweight aerobatic and 3D performer

42-7/8" wingspan, 36-5/8" long, 363 sq. in. wing area, 34-1/2 oz. ready to fly weight. Almost-ready-to-fly, ultra-lightweight aerobatic trainer with excellent flying characteristics and performance. The aircraft is laser cut balsa and plywood with reinforcements fitted at highly stressed areas. Fuselage, wings, tail plane and fin are factory-built and pre-covered with iron-on film. The canopy and upper hatch are removable for access to the flight battery and servos. The large wing area makes it a very good-natured, neutral flying airplane, capable of all pattern style maneuvers. Two-part wing makes it easy to transport and store. Assembly takes 6-8 hours; the included illustrated instruction manual is clear and takes you step-by-step. Decals, lightweight wheels and small accessory parts are included. Controls are: Ailerons (2 servos), Rudder, Elevator and Throttle.

Radio
1 - SPM6600 DX6i 6-Ch. Transmitter, AR6200 Receiver, no servos
4 - HTS055 Hitec HS-55 Servos
2 - HT0099 Hitec 6" Servo Extension
2 - HT0097 Hitec 12" Servo Extension

Motor/Prop
1 - PM281412 AXI Gold 2814/12 Outrunner Motor
1 - PM280802 Radial Mount Set for AXI 2808 & 2814 Outrunner Motors
1 - PE10070E 10x7E Thin Electric Prop
1 - MJ4703 Collet Prop Adapter for 4mm Shaft, M6
1 - HLHS150W Spinner 1-1/2" White

Motor Controller
1 - JESAP40 Advance PLUS 40 Amp Brushless Motor Controller
1 - JESAP01 Jeti Advance PLUS Program Card * optional

Battery
1 - PQ33002 Twenty-Five 2 Cell 7.4V 3300 mAh LiPo

Charger
1 - HT9253 Multicharger LiPo/Ni Charger
1 - PC001E Charger Lead with Deans Ultra Connector & Banana Plugs

Accessories
1 - GR9578AP Accessory Pack for Extra 300S
Glue, Solder, Connectors, etc.