Fiberglass Floats for Radio Control Model Airplanes from Hobby Lobby!

Fiberglass Floats for RC Planes

NEW! Complete float set including water rudder

ABS floats for .40-.60 airplanes

34-1/4" long x 4-3/4" wide x 4" tall, 22-14" wide when both floats are assembled. Each ABS float weighs about 11 oz. without hardware. Works well with airplanes from 8-11 pounds flying weight. Complete with main and front gear legs, spreader bars, mounting hardware, and reinforcements for mount points. One float comes with the rudder mount pre-installed; the steering arm and cable are included. Complete instructions with illustrations are included. Floats come in gloss white and do not need to be painted. Excellent water handling is provided by the V-hull design with extra strakes for directional stability.

NEW! Exceptional lightweight ready-to-use fiberglass floats

Easy to install fiberglass floats by Hacker Model Cz! These are high quality, well designed, light, and strong. Fiberglass floats have a big advantage over plastic molded floats: the corners are molded much sharper which makes the floats plane on the water much better than the rounder-shaped plastic floats. Quickly convert your landbased RC airplane to a waterbased RC float plane. Good instructions Included showing exactly how to install the floats on music wire struts. Floats include axle mount hardware.

Other Floats

Floats for Wingo

19" long cut foam floats with mounting hardware and plastic film for bottom covering. Floats are easy to attach and remove. For additional power when using floats, we recommend gearbox (MJ8019), prop adapter (MJ8030), prop (PE08060E), and connector lead (BAT225).

Floats for Super Zoom

20" long foam floats and all the necessary hardware to easily convert your Super Zoom 4D for flying off of water. Weight of floats including hardware is only 2.2 oz. Small amount of assembly required, takes about 30 minutes. After that it only takes seconds to convert from wheels to floats and back again.

Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948

NEW! Complete float set including water rudder
SFM3881 ABS Floats for .40-.60 Planes .... $ 49.90 ESTIMATED ARRIVAL 07/04/08 - Please Preorder Now	34-1/4" long x 4-3/4" wide x 4" tall, 22-14" wide when both floats are assembled. Each ABS float weighs about 11 oz. without hardware. Works well with airplanes from 8-11 pounds flying weight. Complete with main and front gear legs, spreader bars, mounting hardware, and reinforcements for mount points. One float comes with the rudder mount pre-installed; the steering arm and cable are included. Complete instructions with illustrations are included. Floats come in gloss white and do not need to be painted. Excellent water handling is provided by the V-hull design with extra strakes for directional stability.


NEW! Exceptional lightweight ready-to-use fiberglass floats

Easy to install fiberglass floats by Hacker Model Cz! These are high quality, well designed, light, and strong. Fiberglass floats have a big advantage over plastic molded floats: the corners are molded much sharper which makes the floats plane on the water much better than the rounder-shaped plastic floats. Quickly convert your landbased RC airplane to a waterbased RC float plane. Good instructions Included showing exactly how to install the floats on music wire struts. Floats include axle mount hardware. HC1801 25" Fiberglass Floats, Pair ..... $ 103.90 AVAILABLE NOW 25" long, 3-1/2" wide, 2-1/2" tall, 11 oz. per. pair. For airplane from 2-1/2 to 4-3/4 pounds.	HC1802 30" Fiberglass Floats, Pair .... $ 112.90 AVAILABLE NOW 30" long, 4" wide, 2-3/4" tall, 12 oz. per. pair. For airplane from 4-3/4 to 7-1/4 pounds. HC1803 35" Fiberglass Floats, Pair .... $ 148.90 ESTIMATED ARRIVAL 05/15/08 - Please Preorder Now 35" long, 4-7/8" wide, 3-1/2" tall, 18-1/2 oz. per. pair. For airplane from 8 to 11 pounds. HC1804 40" Fiberglass Floats, Pair .... $ 159.90 ESTIMATED ARRIVAL 07/25/08 - Please Preorder Now 40" long, 5-1/2" wide, 4" tall, 21-1/2 oz. per. pair. For airplane from 11 to 15-1/2 pounds.


Other Floats

Floats for Wingo
19" long cut foam floats with mounting hardware and plastic film for bottom covering. Floats are easy to attach and remove. For additional power when using floats, we recommend gearbox (MJ8019), prop adapter (MJ8030), prop (PE08060E), and connector lead (BAT225).

Wingo Floats: IMD5506 Float Set for Wingo USA, Complete ..... $ 47.90 AVAILABLE NOW


Floats for Super Zoom
20" long foam floats and all the necessary hardware to easily convert your Super Zoom 4D for flying off of water. Weight of floats including hardware is only 2.2 oz. Small amount of assembly required, takes about 30 minutes. After that it only takes seconds to convert from wheels to floats and back again.

Super Zoom Floats: HC1809 Hacker Super Light Floats for Super Zoom 4D ..... $ 22.90 AVAILABLE NOW