FlyCamOne3 V2 Micro Video Camera Core Set

Version 2 with improved smooth built-in pan and tilt

FlyCamOne3, the evolution of light-weight video recording and viewing. The FlyCamOne3 Core Set V2 (FC3100) includes the video recorder, 2” video screen and camera mounting plate. You can view your recordings directly on the 2” TFT screen without the need for additional equipment. In the past, you needed to have your PC or laptop to watch your recorded videos. The screen is removed for flight and replaced by the mounting plate.

With the addition of the new FlyCamOne3 5.8 GHz Transmitter Set (FC3102), the screen is replaced by the 5.8 GHz transmitter module; now the camera sends the video to the receiver that is connected to the screen. The camera is still recording to the SD card as well as sending live video footage to the screen on the ground. The receiver module can be connected to FlyCamOne3 V-Eyes (FC3004) for a bird’s eye view, in real time, of the video stream from your model.



The FlyCamOne3 GPS Module (FC3007) will send information on altitude, speed and direction during flight. With a receiver that has 3 additional free channels, full head tracking will be possible (pan, tilt, start/stop). The pan and tilt functions are built into the camera and do not require additional servos. The functions Pan, Tilt, and On/Off can be controlled on the ground by the 433 MHz transmitter/receiver FlyCamOne3 LinX (FC3005) without using the model’s transmitter.

Camera Module: 3-7/8" x 2" x 5/8", 62 grams including mounting plate, 500 mAh Lipo, VGA resolution, 28 FPS, 2 internal step motors for Pan and Tilt via separate cable, Infrared motion sensor for automatic recording, requires a Micro SD card with a minimum of 4MB writing speed up to 8 GB storage.