Best flying Alfa airplane yet
33-1/2" wingspan, 32-1/2" long, 186 sq. in. wing area, 15-1/2 oz. flying weight. The motor mount, fuselage battery tray, servo mount, and battery hatch are all pre-assembled. Ailerons are pre-hinged and the control linkage pre-installed; just install your servo and connect the linkage. This color scheme is great for the modeler as it is easy to recognize your airplane's orientation.

Hand launches easily with the long tail. Flight performance is similar to a pattern airplane, smooth and precise. Landing speed is slow and control is maintained right up to touchdown. Scale waterslide decals for 2 authentic aircraft are included. Due to the long nose moment it is suggested that you mount your receiver behind the wing and that the flight battery be placed at the rear of the battery tray to achieve the correct balance. For 3-channels: Aileron, Elevator and Throttle.
Here's Everything you'll need:
Radio
1 -
SPM5500 DX5e Full Range Transmitter, AR500 Receiver, no servos
2 -
HTS055 Hitec HS-55 Servos
Motor/Prop
1 -
SK400XT Esskay 400XT Outrunner Brushless Motor
1 -
P09060SF 9x6 Slowflyer Prop
1 -
MJ4698 MPJet Ultralight Collet Prop Adapter for 3mm Shaft
Motor Controller
1 -
ABC20 Atlas Black 20 Amp Brushless Motor
Battery
1 -
YTB13003 3-Cell 11.1V 1300mAh 20C LiPo Pack
Charger
1 -
SRC506 IC6 Balance Lipo Charger
1 -
SRC513 PQ/HP Adapter for IC6 Charger
Accessories
Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Intermediate