Classic scale R/C model for gas or electric power

108-1/2" wingspan, 81" long, 1680 sq. in. wing area, 19-1/2 lbs. flying weight. The Stinson is one of the most attractive civilian aircraft of the post WW2 period. It could carry 4 people and do it in style. Our version of this airplane is all built-up conventional wood construction from precision laser cut parts. Each model is expertly built by a single technician dedicated to producing an outstanding model.

The covering is genuine Oracover, known world-wide for its superior performance. The colors are original factory stock paint schemes, either red over cream or blue over cream. In either case the epoxy glass cowl and wheel pants are painted to match the covering. The landing gear is a robust all-carbon fiber unit, suitable for years of use even under adverse conditions. The wings have scale rib spacing and internally driven flaps. Rudder is a pull-pull system and each elevator half is individually driven.

Access to the interior of the fuselage is provided by a large hatch in the center of the wing. Designed for gas motors of 26cc or larger, we built ours with a large AXI 5345 Outrunner brushless motor. Either choice provides you a model with excellent performance. With a 10 cell 6000 mAh battery our flight times are 10-12 minutes with reserve.

The big Stinson's handling both on the ground and in the air is a total joy, very easy to fly and responsive. For those who want a big elegant airplane that will bring a smile to your face each time you fly, the Stinson is your choice. For 6-channel radio (minimum): Ailerons (2 servos), Flaps (2 servos), Elevator (2 servos), Rudder and Throttle.

* Note: The HUGE box that this product comes in makes it an Oversize Shipment that has to be delivered by Truck Freight. The additional shipping charge is $250.00.

Technical Specifications: Length: 81" Wingspan: 108-1/2" Flying Weight: 19-1/2 lbs. Controls: Ailerons, Elevator, Rudder, Throttle, Flaps Wing Area: 1680 sq. in.

Radio
1 - SPM7800 DX7s 7 Ch w/ AR8000 NO SX's MD2
3 - HTS0635 HS-635 HB Hi Torque Servo
3 - HT0604 12" Aileron Extension w/Gold Pins
4 - HT0605 24" Aileron Extension w/Gold Pins

Motor/Prop
1 - PM534516HD AXI 5345/16 HD Gold Line
1 - APC21012WE 21x12 Thin Electric Prop

Motor Controller
1 - ERCE120P eRC 120A HV Brushless Programmable Opto ESC
1 - ERCE02 eRC Electronic Programmer
1 - Voltage Regulator with Failsafe Switch, 6V

Battery
2 - TP50005SPL2 5 Cell 18.5V 5000 mAh Pro Lite V2 20C LiPo

Charger
1 - IMX10501 B6-Pro 80 Watt Balance Charger for 1-6 LiPo Cells

Accessories
Includes: Glue, Solder, Connectors, etc.

27% Stinson Control Throws

• Ailerons: 7/8" Up and 5/8" Down with no expo
• Elevators: 1-1/4" Up and Down with 10% expo
• Rudder: 1-1/2" In each direction with 20% expo
• Flaps:1" and 1-3/4" I use the servo speed function on my radio to slow the movement down.


• Center of Gravity:4-7/8" from the LE at the wing root.