Hawk ARF Electric RC Glider

Built-up sailplane with Brushless Motor, 30A Speed Control, Folding Prop and Spinner - all included and installed

78" wingspan, 41-3/4" long, 507 sq. in. wing area, 30-1/3 oz. flying weight. Hawk comes pre-built and covered. Main spar has carbon fiber reinforcement. Classic built-up construction using balsa and light plywood. The 300W Outrunner motor and 30 Amp speed control are pre-installed. Includes a 9.8x5 carbon reinforced folding prop and plastic spinner. Hawk quickly climbs to thermal altitude with the included power system. With a little thermal assistance, flights can last for an hour or more. Wings are held in place using rubber bands for quick assembly at the flying field. Airplane comes with a clear canopy, all necessary hardware, and complete illustrated instructions. Controls are Ailerons (2 servos), Elevator, Rudder and Throttle.

Radio
1 - HTR971H Focus 4 FM with 4 HS-85 Servos
1 - HT0096 Hitec Aileron "Y" Connector
2 - HLAE320 24" Extension for Hitec/JR

Motor/Prop
All Included in Kit: 300W outrunner motor, 30A motor, 30A motor controller, 9.8x5 carbon reinforced folding prop with plastic spinner!

Battery
1 - PQ22003 Twenty 3 Cell 11.1V 2200 mAh LiPo

Charger
1 - ETC2500 LiPoly Smart Charger for 1-4 Cells

Accessories
1 - SFM230AP Accessory Pack for Hawk
Glue, Solder, Connectors, etc.