Servo
Accessories, Connectors and Extensions
|
Servo
Accessories, Connectors and Extensions
|
| Home | Hitec Servos | |
Test and center your servos before you install them |
|
 |
Tiny 1-3/8 x 7/16 x 7/8", 8 grams. Servo adjuster allows you to connect 1 or 2 servos for centering or testing without the use of a receiver and transmitter. Connect any 4-5 cell receiver pack for power, plug in your servo(s), rotate the knob to test the travel then return the knob to the middle to center your servos. |
Connect your ailerons and flaps when you slide on your wings |
|
|
Each package comes with 2 connectors, 2 housings, and screws for mounting and heat shrink to protect your electrical connections. Ideal for use in airplanes and gliders with slip on wings. With these you can connect both the flap and aileron servo in a wing panel with one plug. This only requires 4 wires rather than the usual 6. One positive and one negative power wire supply both servos in the wing while each servo has a separate signal wire. Greatly decreases the amount of wire clutter in your airplane and the chance of incorrectly connecting your servos at the flying field. The metal pins not the housing identify the male connector. Soldering required. |
Reduce glitches in long servo leads |
|
|
Long servo leads can generate electrical "noise" as your airplane travels through the air, this in turn creates glitches in your servos and in extreme instances loss of control. By simply wrapping the extension around the ferrite noise reducer at the receiver end of the extension, glitches are eliminated . Use 5mm for standard servo leads and 8mm for heavy-duty servo leads. Use one per long servo lead. |
Positive lock for servo plugs |
|
 |
Simple effective method of keeping your servo leads connected. |
Adjust the speed of a servo |
|
 |
3/8" x 1" x 3/16", 3 grams. Tiny unit allows you to adjust the speed of any proportional servo from .7 seconds to 14.7 seconds in 16 steps. Plug module into the receiver channel that you want to control, plug the servo into module, and adjust the speed using the screw on the side of module. Great for setting scale speed on retracts (with proportional servo) or scale speed for operating flaps. The longer transition times are ideal for marine models. Can be used to slow the operation of 2 servos with the addition of a "Y" connector. |
Fly V-Tail and Flying Wing planes without buying a new radio |
|
Plug in this electronic mixer between your receiver and servos for use in V-Tail, Flying Wing and Delta Wing models. It makes parallel and opposite mixing of 2 servo functions possible. |
 |
Super strong servo arms for critical control |
|
 |
An assortment of 8 high strength servo horns that fit Hitec servos from the HS-60 up through the full size HS-422. Great for those applications that require either high strength or the added throw of a longer control horn. We use these on a HS-85 in our mechanical retract installations, it gives us the added throw needed for a solid lock both up and down. |
Long Extensions for aileron servos |
|
 |
One
end plugs into receiver. Servo plugs into other end. Useful when servos
are mounted in the wing out near the ailerons or for servos mounted
in the tail of a plane.
|
| 24" long | 36" long |
Hitec heavy gauge aileron extensions for high power applications |
|
 These heavy-duty extension leads are great for high torque servos when mounted far away from the receiver. They are made of 22-gauge wire and have gold connectors for solid contact and full voltage transfer. Plugs are for Hitec and JR servos. |
|
Hitec "Y" Connector and Aileron Extensions |
|
No soldering or wire cutting with these Gold-plated servo-to-receiver adapter connectors |
|
 |
Servo type listed first, then receiver. About 3" long. These let you plug a different brand of servo into your receiver without cutting wires or soldering on a connector. These are gold plated for the best oxidation-free electrical contact possible.
|
Cart | Home | Product Index | Servos | Low Price Guarantee | Catalog | Contact Us
Phone: 1-866-WE-FLY-RC (1-866-933-5972)
Fax: 615-377-6948
Copyright © 1996-2008 Hobby Lobby International, Inc. All Rights Reserved.
