HS-5485HB Digital Servo

HS-5485HB Digital Servo

The HS-5455HB is an excellent choice for sport airplanes up to .60 size . Featuring a programmable digital circuit and our Karbonite™ gear technology that offers four times the strength as our standard nylon gears and after hundreds of thousands of cycles won't show any signs of wear.

Applications: Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface.

Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.

Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.

Hitec HS-5485HB Digital Servo Highlights:

• Programmable Digital Circuit
• Karbonite Gear Technology
• Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
• *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.

Technical Specifications: Hitec HS-5485HB Digital Servo Specs: Size Category: Standard Type: Digital Torque: 72 oz/in @ 4.8V, 89 oz/in 6V Speed: .20 sec/60 deg @ 4.8V, 0.17 sec/60 deg @ 6V Weight: 1.59 oz Bushing Or Bearing: Bearing Bearing: Single Motor Type: 3-Pole Gear Type: Metal Gear Material: Karbonite

For technical support or warranty claims on this product, please contact Hitec at: (858) 748-8440