Jeti DUPLEX 30 Amp Module

Real time measurement of Volts, Amps and mAh used

3/4" x 5/8" x 1/4", 13 grams, 0-30A, 0-60V. The MUI module is a sensor for the measurement of current, voltage and the consumed capacity of flight batteries. All data from the sensor is transmitted through the DUPLEX system (receiver and transmitter modules) in real time, giving the pilot valuable information during flight. Various alarms can be set for each of the measured values; these are audible alarms generated by the transmitter module even if the JETIBOX is not attached. With the JETIBOX attached to the transmitter module, the actual values can be displayed on the LCD screen in real time. Maximum and Minimum values are recorded for current and voltage and can be reviewed after the flight on a JETIBOX. Primarily intended for sensing the current and voltage of power batteries in electric power systems, the MUI module can also be used in models with internal combustion engines. In this application the unit could be used to warn of a low voltage condition in the receiver battery system preventing the loss of your valuable aircraft.

Measures:

• Voltage (0 to 60V) - with a record of max and min voltage
• Current (0 to 30A) - with a record of max current
• Used battery capacity
• Motor run time

Jeti DUPLEX Overview Page