MIG-15 Scale Electric Ducted Fan ARF

Product #: ALF102

Was: $179.90

SALE Price: $149.90

Qty :

In Stock

Best performing electric ducted fan ARF we have ever seen! INCLUDES the ducted fan!

29-1/2" wingspan, 29" long, 198 sq. in. wing area, 16.5 oz. flying weight. We were astounded with the performance of this jet. Equipped as we recommend, the model has enough power to ROG (rise off grass) by sliding on its belly, climb at a remarkable rate and simply tear up the sky. Outside loops are possible and inside loops from level flight are large and easily done. Very broad speed range, streaks by on high speed passes yet slows to a crawl for easy landings. When mated with a "JetScreamer" OUTRUNNER, the included Alfa fan produces temendous thrust. Handlaunch is very easy, just a gentle toss. All hollow molded foam construction with a toughened external layer to resist dings, the areas of the model that come in contact with the ground are covered in a tough plastic for wear. Construction is simple, but more involved than some of the other Alfa models. You glue the wings, tail and battery tray in place and install your radio system and servos. The ducting is smooth and beautifully pre-done; the battery and radio hatch is pre-cut with the latch installed. Includes waterslide decals for a Soviet or Czech version as well as a packet of glue to aid in placing the decals. Controls are Aileron, Elevator and Throttle.

Here's Everything you'll need:

Radio
1 - HTR48725 Hitec 3 SS, Micro 05 Receiver, 2 HS-55 Servos
2 - HTS055 Hitec HS-55 Servos

Motor/Ducted Fan
1 - MMC5156 LittleScreamers "JetScreamer" OUTRUNNER w/21mm Adapter
1 - ALF51013 Alfa Rotor Plug for 3mm Shaft
1 - ALF51031 Alfa 5 Bladed Rotor * optional upgrade
3 blade ducted fan unit included in kit!

Motor Controller
1 - SPIN22 Jeti SPIN 22 Amp Electronic Speed Control
1 - SPINBOX Jeti "SPIN BOX" Programming Control

Battery
1 - TP21003SPL2 3 Cell 11.1V 2100 mAh LiPo

Charger
1 - ETC2500 LiPo Smart Charger for 1-4 Cells
1 - BAT220 Charger Adaptor, JST to Deans Ultra

Accessories
Glue, Solder, Connectors, etc.

Here's Everything you'll need: