Mini FuntanaX ARF

The Mini Funtana X™ is another in E-flite's outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby, so your electric flight experience is always a positive one.

To create the new Mini Funtana X ARF, E-flite began with the proven 3D benefits of the original Mini Funtana design. From there, they increased the wing area, added wing fillets and optional Side Force Generators, resulting in an airplane that excels in high-alpha and all-around maneuverability. Outfitted with an E-flite® Park 480 brushless outrunner, the Mini Funtana X is capable of superb vertical performance.

Mini Funtana X ARF Highlights

• Tapered thickness airfoil for improved aerodynamic performance
• Optional Side Force Generators (SFG's) included
• Designed for use with E-flite's Park 480 Brushless Outrunner Motor
• Balsa/lightweight plywood construction covered in genuine UltraCote®
• Wing fillets
• Aluminum landing gear and steerable tail wheel
• Easy-access magnetic battery hatch
• Factory-painted fiberglass cowl and wheel pants
• Assembles in just a few evenings
• Generous wing area for lighter wing loading-26% larger than original Mini Funtana
• Large control surfaces for precise control in high-alpha flight

Needed to Complete: 6-channel transmitter (for proper mixing and dual rate capabilities), Micro receiver, 4 sub-micro servos, Motor, 40A brushless ESC, 12x6 electric prop, Battery & charger

Technical Specifications: Mini Funtana X ARF Specs Wingspan: 43 in (1092mm) Overall Length: 40.5 in (1028mm) Wing Area: 447 sq in (28.8 sq dm) Flying Weight: 27-29 oz (765-822 g) Motor Size: Park 480 BL outrunner Radio: 6-channel Tx and micro Rx Servos: 4 sub-micro Trim Scheme Colors: True Red (HANU866), White (HANU870), Deep Blue (HANU873), Silver (HANU881) CG (center of gravity): 3.75 in (95mm) behind the leading edge Prop Size: 12x6 electric Hardware Included: Yes Speed Control : 40A brushless Recommended Battery: 11.1V 3-cell 2100mAh LiPo Control Throw (Ailerons): Low 1" (25mm) Up/Down or High 1 7/8" (48mm) Up/Down Control Throw (Elevator): Low 3/4" (19mm) Up/Down or High 2 5/16" (58mm) Up/Down Control Throw (Rudder): Low 1 3/4" (45mm) Left/Right or High 2 3/4" (70mm) Left/Right Approx. Assembly Time: 4 hours

For technical support or warranty claims on this product, please contact Horizon Hobby at: (800) 338-4639