Mini Retracts Steerable Nose

Steerable retract nose gear for up to 3 pound plane

26mm x 31mm mounting base requires a 14.5mm x 16mm recess for installation. 2.5mm wire approximately 5-1/2" long. Bend the wire leg to the desired length and install your wheel with the included star washers. Can be adjusted to retract forward or backward. Positive up and down locks, total actuator travel is about 5/8". Does not require a special retract servo. Requires 2 servos, one for retraction and another for steering. In some cases the servo that actuates the rudder can be used for steering. Mounting screw not included.