Mini-Telemaster ARF

No time to build the kit? Now an Almost Ready to Fly airplane!

47" wingspan, 32-1/2" long, 329 sq. in. wing area, 23 oz. flying weight. Up until now, if you wanted a Mini-Telemaster, you had to build one yourself. Not any longer. Mini-Telemaster is now offered as an ARF. Airplane is pre-built and covered. The hard building has been done for you. Assembly takes only about 3 hours and consists of gluing the wing halves together, installing the tail parts to the fuselage and installing the radio equipment. The main landing gear is pre-bent wire and the tailwheel is steerable. When it comes to flying, Mini-Telemaster flies like a Telemaster. Smooth, responsive, and predictable; it still has all of the gentle handling and slow flight characteristics of the larger Telemaster airplanes. The difference is it can be flown in a much smaller area. For 3 Channels: Elevator, Rudder and Throttle.

Radio
1 - HTR48725 Hitcc Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos

Motor/Prop
1 - PS220834 AXI Silver 2208/34 Outrunner Brushless Motor
1 - PM22002 Radial Mount Set for AXI 22 Series Motors
1 - P08060SF 8x6 Slowflyer Prop

Motor Controller
1 - JEE012 Jeti ECO 12 Amp Brushless Motor Controller

Battery
1 - TP21003SPL2 Pro Lite V2 3 Cell 2100 mAh 11.1 20C LiPo

Charger
1 - ETC2030 Smart Charger for 1-3 LiPoly or 1-8 Ni Cells
1 - BAT221 JST to SPEED 400 Connector Adapter
1 - DEA1300 Deans 1300 Ultra Plug Connectors, pair

Accessories
Glue, Solder, Connectors, etc.