Mini Gee Bee Senior Sportster ARF

Beautiful to look at - a Joy to fly

48-1/2" wingspan, 36" long, 395 sq. in. wing area, 34 oz. flying weight. All wood construction, laser cut precision, lightweight and strong. All the main assemblies are pre-built and pre-covered; all the flying surfaces are pre-slotted for CA hinges. Wheel pants and engine cowl are pre-finished fiberglass. Flight times with the power system we recommend are about 10 minutes. Aircraft is very light, landings are slow and soft, takeoffs are quick. Can be flown off very short grass but the wheel pants make it most suited for hard, smooth surfaces. The airplane has no bad habits; this is a Gee Bee that is easy to fly. Stalls are slow and straight-ahead with a quick recovery. Quick to build, includes good photo-illustrated instructions. Assembly will take from 6-8 hours. Suitable for anyone with a little aileron experience. For 4-channels: Ailerons (2 servos), Elevator, Rudder and Throttle.

Radio
1 - SPM6600 DX6i Full Range Transmitter, AR6200 Rx, MD2, no servos
4 - HTS055 HS-55 Sub Micro Servo
2 - HT0099 Hitec 6" Servo Extensions
2 - HT0097 Hitec 12" Servo Extension

Motor/Prop
1 - AM231716 Atlas 2317/16 Outrunner Brushless Motor
1 - PE10050E 10x5E Thin Electric Prop

Motor Controller
1 - ABC20 Black 20 Amp Brushless Controller

Battery
1 - PQ22003 Twenty 3 Cell 11.1V 2200 mAh LiPo

Charger
1 - ETC2500 Li-Poly Smart Charger for 1-4 Cells
1 - BAT220 JST to Deans Ultra Charger Lead

Accessory Pack
1 - ACW395AP Accessory Pack for Mini Gee Bee
Includes: Glue, Solder, Connectors, etc.