Miss Stik Laser Cut Kit

Laser cut kit: builds into an ultra lightweight floater!

55" wingspan, 35-1/2" long, 400 sq. in. wing area, 22 oz. flying weight. With a wing loading under 8 oz. per square foot, you can climb to thermal altitude in seconds, then float for as long as you wish. Very precise laser cut balsa kit designed by Tom Hunt. Written instructions with clear full size plans, wire main landing gear, molded front cowl, top quality balsa, and clear windshield material. Classical in design, the model is very easy to fly and lands slowly. A beginner can fly this plane with confidence. Brilliant performance with the power system we recommend. For 3 channels; rudder, elevator and throttle.


Radio
1 - HTR48725 Hitcc Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos

Motor/Prop
1 - PM221226 AXI Gold 2212/26 Outrunner Motor
1 - P10070SF 10x7 APC Slowflyer Prop
1 - GR1304/3 38mm Spinner, 3.2 Shaft, 8mm Prop Hole

Motor Controller
1 - JEE012 Jeti ECO 12 Amp Controller for Brushless Motor
1 - JAP01 Jeti Advance PLUS Program Card * optional
1 - MJ21011 1.8mm Gold Connectors
1 - BAT228 JST Connector, Female

Battery
1 - TP9102SJPL2 Thunder Power2 Cell 910 mAh LiPo Pack w/JST Connector

Charger
1 - ETC2500 LiPoly Smart Charger for 1-4 Cells

Wheels
1 - LYT53 2-1/16", pair.

Accessories
Glue, Solder, Connectors, etc.