Motor Mounts for Brushless Motors from Hobby Lobby!

Universal mounting system for .40 - .90 size Glow to Electric conversions
	AMM111 Aluminum Motor Mount System for OUTRUNNER Brushless Motors, 40 pcs. ..... $ 17.90 AVAILABLE NOW Mounts all OUTRUNNER motors that have a radial mount, to the firewall of your airplane. The aluminum spacers are about 1/2" diameter with a 5/32" hole for the long bolts. The 40 piece package includes 4 pieces each of: 3/16", 3/8", 1/2", 3/4", and 1" long spacers, and 1", 1-9/16", 2", and 3-1/8" long 4mm hex head screws and 4mm blind nuts. The maximum length of the Motor Mount is 2-7/8".

Hardware to mount an OUTRUNNER motor!

Tube Nylon Spacers, 1/2" diameter HLH8852 1/8" Long Spacer, 4 pcs. ..... $ 1.00 AVAILABLE NOW HLH8853 1/4" Long Spacer, 4 pcs. ..... $ 1.00 AVAILABLE NOW HLH8854 1/2" Long Spacer, 4 pcs. ..... $ 1.10 AVAILABLE NOW HLH8855 1" Long Spacer, 4 pcs. ..... $ 1.40 AVAILABLE NOW Stainless Steel Machine Screws HLH8875 3", 8-32 Phillips Roundhead Machine Screw, 4 pcs. ..... $ 2.50 AVAILABLE NOW	HLH8876 4", 8-32 Phillips Roundhead Machine Screw, 4 pcs. ..... $ 4.50 AVAILABLE NOW Nuts and Washers HLH8860 8-32 Blind Nuts, Zinc Plated Steel, 4 pcs. ..... $ 1.00 AVAILABLE SOON HLH8861 8-32 Nyloc Nuts, Stainless Steel, 4 pcs. ..... $ 1.00 AVAILABLE NOW HLH8862 Stainless Steel Washer, 4 pcs. ..... $ 0.30 AVAILABLE NOW
Radial Mount System to mount your AXI OUTRUNNER "backwards"
Each set includes a mounting flange, propeller adaptor, securing collar and screws to mount the flange to the motor. RMS allows the motor to be mounted in front of a firewall.	PM22002 Radial Mount Set for AXI 2208, 2212, and 2217 OUTRUNNER Motors ..... $ 12.90 AVAILABLE NOW PM280802 Radial Mount Set for AXI 2808 and 2814 OUTRUNNER Motors ..... $ 13.90 AVAILABLE NOW PM282002 Radial Mount Set for AXI 2820 and 2826 OUTRUNNER Motors ..... $ 13.90 AVAILABLE NOW PM41002 Radial Mount Set for AXI 4120 and 4130 OUTRUNNER Motors ..... $ 18.50 AVAILABLE NOW

Rock solid mounts for large OUTRUNNER motors
Heavy-duty anodized aluminum motor mounts provide rock solid support for your large OUTRUNNER motors. Each comes with screws and nuts to assemble the adjustable mount, and blind nuts and bolts for attaching mount to your firewall. The easiest way to convert your larger, glow powered airplane to OUTRUNNER power.
	AMM400 Atlas Mount for .40-.60 Size OUTRUNNER Brushless Motors ..... $ 18.50 AVAILABLE NOW Adjustable from about 3-3/4" to 5-1/4" from firewall to front of mount. Fits AXI 41 series motors and others with the same mount spacing.
	AMM500 Atlas Mount for .60-1.20 Size OUTRUNNER Brushless Motors ..... $ 22.50 AVAILABLE NOW Adjustable from about 4-1/4" to 6" from firewall to front of mount. Fits AXI 41 and 53 series motors and others with the same mount spacing.

Super-light aluminum stick mount for motors with 8mm rear shafts
	MMC3001 LittleScreamers Motor Mount with Heatsink for 8mm Mount Shafts ..... $ 2.60 AVAILABLE NOW 3/8" long, 8mm diameter shaft clamp, 3 gram total weight. Slips onto 10mm motor sticks and will mount all LittleScreamer motors as well as any other motor with an 8mm rear mount shaft like the Potensky POTM030. Integral heat sink aids motor cooling.

Stick motor mount for AXI and Atlas OUTRUNNERS
	AMM010 10mm Stick Mount for OUTRUNNER Brushless Motors ..... $ 6.90 AVAILABLE NOW Weighs less than 5 grams. Includes 4 screws for mounting the motor. Machined aluminum motor mount for AXI 22 and Atlas 23 series motors (or other motor with Speed 400/480 mount spacing, 16mm/19mm). Can be screwed to the 10mm stick that is included with many models, avoiding the need for a radial mount. Can be mounted in either a pusher or tractor orientation.

Quick mount for AXI outrunner on 3mm and 6mm "foamie" airplanes
EVPM01 Universal Motor Mount for 3mm Foam Airplanes ..... $ 5.30 AVAILABLE NOW	EVPM02 Universal Motor Mount for 6mm Foam Airplanes ..... $ 5.30 AVAILABLE NOW Can be used with any OUTRUNNER brushless motor (up to 30mm diameter) that would normally mount behind a firewall. This includes the AXI 22 series motors when using the AXI Prop Saver prop mount (PM22004). Can also be used with Variable Pitch Prop unit (EVP201). Tough injection molded plastic strengthens the front end of your foam airplane. Install with tape for easy adjustment or removal.

Sturdy mount for the large AXI brushless motors
	PM41001 Aluminum Motor Mount for AXI 41 Series Brushless Motors ..... $ 18.50 AVAILABLE NOW Three piece anodized aluminum mount, adjustable for length 3-1/4 to 3-3/4", height 2", width 2-1/2". Front plate pre-drilled for 28 and 41 series AXI motors. Lightweight yet strong comes with screws and nuts for attaching the front mount to the sides. Requires 4 bolts to attach to your firewall.

Bulkhead mount for Jeti Phasormotors
DB001 Aluminum Mount for Jeti "Phasor" Brushless Motors ..... $ 24.80 AVAILABLE NOW	2.18" (55mm) diameter of large mounting ring, 1.43" (36.5mm) Inside Diameter of mounting ring, 1.10" (28mm) deep mounting ring. Weight of the aluminum ring is 0.6 oz. (17 grams). Three 4-40 bolts will hold this to your bulkhead or firewall. The mounting ring is deep enough (1.1") so that you can move your Jeti motor about a half inch fore and aft to adjust to your cowling length. Aluminum ring is slit so that the steel clamp can squeeze the motor securely in place.