Jason Says:

"Wish we had these when I was learning collective pitch helis."

Step up from coaxial to single-rotor to collective pitch

If you're ready to step up from a coaxial or single-rotor fixed-pitch heli, the Blade SR is the absolute best way to make that transition a successful one.

It comes out of the box programmed to provide softer climb, pitch and roll response around the center of stick movement. This, combined with the tough, two-piece main frame and lower head speed, makes the Blade SR more forgiving and easier to master than most conventional Collective Pitch helicopters. Plus, it's big enough to fly outdoors even if there's a little wind.

Blade SR Highlights:

• 100% factory-assembled, test-flown and ready-to-fly
• A great 2nd heli for anyone who has flown a coaxial or single rotor fixed-pitch heli
• Softer control response around center for transitioning pilots
• Includes 6-channel 2.4GHz DSM2 transmitter
• Includes DC Li-Po balancing charger with AC adapter
• Includes 3S 11.1V 1000mAh Li-Po battery pack
• Spektrum AR6100e Microlite Receiver, installed
• E-flite G110 Heading Lock Gyro, installed
• Direct drive tail motor
• Sturdy, shock absorbent two-piece main frame
• Full line of replacement and option parts available
• Main Rotor Diameter: 21.80 in. (552mm)
• Gross Weight: 12 oz. (340 g) with battery
• Length: 19.10 in. (485mm)

Technical Specifications: Length: 19.1" Flying Weight: 12 oz. Rotor Diameter: 21.8"

For technical support or warranty claims on this product, please contact Horizon Hobby at: (800) 338-4639