Onyx 200 AC/DC Sport Peak Charger

The Onyx 200 is great for electric car or boat modelers. With charge rates from 1.5 to 5 amps, it can safely and fully charge batteries ranging from 750mAh "AAA" batteries and nitro receiver packs, to the biggest sub-C NiMH packs-and many things in between! Great for 1/18th to 1/8th scale electrics, nitro receiver packs, and more! A tiny, lightweight built-in switching AC power supply plus DC input capability is perfect for use at home or the track. Easy to see LEDs and audible tones make it easy to track the charge status at any time.

Key Features:
A super-small, lightweight built-in AC power supply is great for cramped pit spaces, and easy portability.
Selectable charge currents of 1.5A, 3A, and 5 amps, with an auto-trickle function.
Pushbutton control, multiple LEDs, and audible tones make for easy set-up and control.
A custom peak detection system loads NiCd and NiMH batteries full of power.
A backup safety timer automatically stops charge to prevent accidental battery overcharge.
Large alligator clips on the DC input easily connect to most 12V DC power sources.
Includes a built-in output lead with standard plug. An adapter is available separately to connect batteries having a Deans Ultra Plug (GPMM3131).
Solid-state reverse polarity and current overload safety devices ensure trouble-free operation and long duration.

Specifications

Stock Number: DTXP4200
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 4-7 NiCd or NiMH cells (4.8-8.4V)
Battery capacity range: 750-7500mAh
Fast charge current: 1.5A, 3A, 5A linear (40W maximum)
Fast charge termination: peak detection
Fast charge safety timer: 90 minutes
Peak sensitivity: 8mV
Auto-trickle current: 1/20 fast charge setting, rounded to 50mA (0-250mA)
Controls: pushbutton, slide-switch
LED indicators: 4 red, 1 green
Audible indicators: Indicates start, stop, errors
Output connections: built-in lead with standard connector*
built-in jack for charging 4 or 5 cell Rx packs
Protective devices: solid-state reverse polarity and current overload
Case size: 5.74 x 4.60 x 1.61" (146 x 117 x 41 mm)
Weight: 17.0 oz. (484 g)

*Adapter leads available separately

Recommended Options
DTXC2209 Standard/Deans Ultra Plug Adapter
DTXC2210 Standard/Vendetta, MiniQuake or RS4 Adapter
DTXP4151 Transmitter Adapter – Futaba
DTXP4152 Transmitter Adapter – Airtronics/Hitec
DTXP4153 Transmitter Adapter – Spektrum/JR

All trademarks are the property of their respective owners.