P-51B Mustang Shangri-La

From the box to the sky in 3 hours!

33-1/2" wingspan, 29" long, 192 sq. in. wing area, 16 oz. flying weight. Just about ready to fly when you open the box. Wing is removable for transport and storage in its box "hangar". Leading edge of wing is reinforced and battery hatch is in front of the canopy. Hollow molded foam with a hardened surface to resist dings and hard plastic where the airplane contacts the ground during landings. Pre-installed ailerons and elevator with pushrods ready for servo installation. Firewall installed and ready for motor. Wing is semi-symmetrical as is the elevator, the airplane flies like a much larger model, smooth and responsive and capable of performing in the wind. Handlaunch is easy with a good grip area under the wing. Waterslide decals for 2 authentic aircraft are included. Good instructions. For 3 channels: elevator, aileron, speed control.

Radio
1 - SPM5500 DX5e Full Range Transmitter, AR500 Receiver, no servos
2 - HTS055 Hitec HS-55 Servos

Motor/Prop
1 - SK400XT Esskay 400XT Outrunner Brushless Motor
1 - P09060SF 9x6 Slowflyer Prop
1 - MJ8031 Long Prop Adapter for 3mm Shaft
1 - MJ21011 1.8mm Gold Connectors, 3 Sets

Motor Controller
1 - JESAP18 Jeti Advance PLUS 18 Amp Brushless Controller
1 - JESAP01 Jeti Advance PLUS Program Card * optional

Battery
1 - PQ12003 EnerLand 3 Cell 11.1V 1200 mAh LiPo Pack

Charger
1 - SRC506 IC6 Balance Lipo Charger
1 - SRC513 PQ/HP Adapter for IC6 Charger

Accessories
1 - ALF211AP Accessory Pack for "Shangri-La"
Glue, Solder, Connectors, etc.