Pilot-1 PA-12 1/6 Scale ARF RC Plane (OVERSIZE)

Nearly 6 foot wingspan Piper Super Cruiser for glow or electric

71" wingspan, 45" long, 711 sq. in. wing area, 80 oz. flying weight. All laser cut balsa and plywood construction, pre-built and pre-decorated; can be assembled and ready-to-fly in a couple of evenings. Covered in genuine Oracover for great looks now and in the future. Step-by-step photo illustrated instructions will guide even the relative novice through the build process to a successful conclusion.

Designed as an electric model, the 1/6th scale PA-12 is suitable for conversion to a glow engine. A .32 2-cycle or a .40 4-cycle are appropriate sizes. While not suitable for the complete novice, this PA-12 is an easy to fly airplane. It does not exhibit any bad tendencies and is totally predictable in flight performance. Flight times of 15 minutes plus are the norm. While not an aerobatic airplane, the PA-12 is capable of loops and rolls and inverted flight (not something you would try in a full scale one).

Includes pre-bent and assembled landing gear, fiberglass cowl, steerable tail wheel, windshield and side glass, wing struts and jury struts with scale fairings, wheels and hardware pack. For 4-channels: Ailerons (2 channels), Elevator, Rudder and Throttle. A radio with end point, exponential, and rudder mixing is recommended.



Radio
1 - SPM6600 Spektrum DX6i Transmitter, 6-Channel Receiver, no servos
4 - HTS0422 Hitec HS-422 Servos
4 - HT060 Hitec 24" HD Servo Extensions

Motor/Prop
1 - PM282012 AXI Gold 2820/12 Outrunner Motor
2 - PM282002 Radial Mount Set for AXI 28 Series Motors
1 - PE12060E 12x6 APC E-Prop

Motor Controller
1 - JAP30 Jeti Advance Pro 30 Amp Brushless Controller
1 - JAP01 Jeti Advance Pro Program Card * optional
1 - MJ21031 3.5mm Gold Connectors, 3 sets

Battery
1 - TP33003SPL2 3 Cell 11.1V 3300 mAh Pro Power V2 20C LiPo
1 - DEA1300 Deans Ultra Plug Connectors, pair

Charger
1 - SRC506 iC6 LiPlus Digital Balance Charger

Accessories
Includes: Glue, Solder, etc.