Pilot-1 Champ 1/8 Scale ARF RC Airplane

Classic Civilian Aircraft from Pilot-1

52" wingspan, 32" long, 362 sq. in. wing area, 34 oz. flying weight. All laser cut built-up wood construction with true scale outline and proportions. A contemporary of the Piper Cub; the Champ was its biggest competitor and in many ways its superior. Like its full scale counterpart, the 1/8 scale Champ is a joy to fly, easy and relaxed. Shoot touch-and-go's, cruise around or do some lazy aerobatics, it's all in a day's work with the Champ.

The model comes with all main components pre-built and pre-covered with all hinges pre-slotted and ready to glue. Landing gear is pre-bent and ready to install. Fiberglass cowl is pre-finished to match the color of the airplane. Complete step-by-step photo illustrated instructions assure that even a novice builder will be successful. Assembly will take about 6-8 hours. For 4-channel control: Ailerons (2 servos), Elevator, Rudder and Throttle.

Radio
1 - SPM5500 DX5e Full Range Transmitter, AR500 Receiver, no servos
4 - HTS055 HS-55 Sub Micro Servo
2 - HT0097 Hitec 12" Servo Extension

Motor/Prop
1 - PM221716 AXI Gold 2217/16 Outrunner Motor
1 - PM22002 Radial Mount Set for AXI 41 Series Motors
1 - P09060SF APC 9x6 Prop

Motor Controller
1 - JAP18 Jeti Advance Pro 18 Amp Brushless Controller

Battery
1 - TP21003SPL2 3 Cell 11.1V 2100 mAh Pro Lite V2 20C LiPo

Charger
1 - SRC506 iC6 Balance Charger for 1-6 LiPo Cells

Accessories
Glue, Solder, Connectors, etc.