Pilot-1 PA-12 1/4 Scale ARF Airplane (OVERSIZE)

For those who love Cubs but want something a little different

106-3/8" wingspan, 67" long (without spinner), 1581 sq. in. wing area, 15-1/2 pounds (electric version). All built up conventional balsa and plywood construction with the emphasis on scale looks and light weight.

Wings have scale rib spacing and are pre-built and covered. Scale wing struts and jury struts are included as well as the scale covers for the ends of the struts. The cowl is a pre-finished fiberglass unit with hinge and panel lines molded in. All covering is genuine Oracover beautifully pre-installed.

All flying surfaces are pre-slotted for the included hinges. Extensive hardware pack with quality clevises and control horns provided. Can be built either as an electric model or with a gas engine. It doesn't need a lot of power to fly beautifully. Ours is powered by an AXI 5320/28 on only 8-cells and flies for 15-25 minutes on 6000 mAh.

Wings are removable for transport. The big PA-12 has all the docile flight character that makes Cubs so popular. The ground handling is solid and its presence in the air is uncanny. On final approach it's easy to mistake it for its full size brother.

Radio
1 - SPM2710 DX7 DSM2 7-Ch. Radio, AR7000 Rx, 4-DS821 Digital Servos
2 - HT0605 24" Aileron Extension w/Gold Pins
1 - DUR65060 Voltage Regulator with Failsafe Switch, 6V

Motor/Prop
1 - PM532028 AXI Gold 5320/28 Outrunner Motor
1 - PE2012W 20x12 Wide Electric Prop

Motor Controller
1 - SPIN77 SPIN 77 Amp Opto Brushless Speed Control
1 - SPINBOX Jeti "SPIN BOX" Programming Control

Battery
2 - YTB45004 4 Cell 14.8V 4500mAh 20C LiPo Pack
1 - DEA7002 Series Module w/Deans Ultra Connectors

Charger
1 - SRC6200 B6 Ultimate 200W Balance Charger/Discharger for 1-6 Lithium

Accessories
Includes: Glue, Solder, Connectors, etc.