Pilot-1 PA-12 1/8 Scale ARF RC Plane

A great flying Piper that isn't a J-3

53-1/4" wingspan, 39-1/2" long, 360 sq. in. wing area, 34 oz. flying weight. The baby brother to our 1/4 scale PA-12, one half the size but retains the fun and great scale looks. All laser cut balsa and plywood construction, pre-built and pre-decorated, can be assembled and ready-to-fly in a matter of hours.

Covered in genuine Oracover for great looks now and in the future. Step-by-step photo illustrated instructions will guide even the relative novice through the build process to a successful conclusion.

While not suitable for the complete novice, the little PA-12 is a very easy to fly airplane. It does not exhibit any bad tendencies and is totally predictable in flight performance. Flight times of 15 minutes plus are the norm. While not an aerobatic airplane, the PA-12 is capable of loops and rolls and inverted flight (not something you would try in a full scale one).

Includes pre-bent and assembled landing gear, fiberglass cowl, steerable tail wheel, windshield and side glass, wing struts, wheels and hardware pack. For 4-channels: Ailerons (2 channels), Elevator, Rudder and Throttle. A radio with end point, exponential, and rudder mixing is recommended.



Radio
1 - SPM5500 DX5e Full Range Transmitter, AR500 Receiver, no servos
4 - HTS055 Hitec HS-55 Servos
2 - HT0097 Hitec 12" Aileron Extensions

Motor/Prop
1 - PM221716 AXI Gold 2217/16 Outrunner Motor
2 - PM22002 Radial Mount Set for AXI 22 Series Motors
1 - P09060SF 9x6 APC Slowflyer Prop

Motor Controller
1 - JAP18 Jeti Advance Pro 18 Amp Brushless Controller
1 - JAP01 Jeti Advance Pro Program Card * optional

Battery
1 - TP21003SPL2 3 Cell 11.1V 2100 mAh Pro Lite 20C LiPo

Charger
1 - SRC505 iC5 LiPlus Intelligent Digital Balance Charger

Accessories
Includes: Glue, Solder, Connectors, etc.