 | Jason Says: | | "This is the charger I use the most. I hate having to lug around several charges and dealing with all the wires and connections. That all went away with the Quattro. One box, 4 batteries at a time. That's what I'm talking about." |
|
Tired of charging one battery at a time? Now charge four! |
9" x 6" x 2-1/2". Compact yet powerful 4-in-1 charger. This charger allows you to plug 4 batteries into one charger simultaneously and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. The batteries do not need to have the same configuration or chemistry. You can connect different types (NiMH, NiCd, LiPo, LiFe, Pb) of batteries into any of the charging ports. No more staying up late charging batteries. The unit consists of 4 independent microprocessor controlled 50-watt chargers. Each can charge any of the available battery types. Each of the chargers can balance-charge Lithium batteries up to 6 cells. Requires a DC power source, either a 12V DC car battery or an AC/DC power supply greater than 200 watts. The balance port connection pins are set at 2.5mm pin spacing and you can balance any pack that has a 2.5mm spacing balance connector, without using an adapter. The charger comes with 2 adapters for balancing: one for Thunder Power lipo packs (2.0mm pin spacing) and one for JST XH batteries. Quattro B6 Charger Instructions Quattro B6 Charger Specs: - Operating Voltage Range: DC 11 to 15 Volt
- Power Source: 12V DC (car battery - AC/DC Power Supply (>200 Watts)
- Charge Power: 50 Watts, current is regulated accordingly - eg. 11.1V battery: charge current approx. 4.5A, 22.2 V battery: charge current approx. 2.2A
- Discharge Power: 5 Watts, current is regulated
- Cell Count: 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead-Acid cells (2-20V)
- Current Drain Balancing (LiPo): 300mA/cell
- Charge Termination (NiCd/NiMH): Automatic, negative Delta Peak method
- Charge Termination (Lead-Acid/Lithium): Automatic, voltage-dependent, CC-CV process
- Dimensions: 225.4 x 158.6 x 62.4mm
- Weight: 38-1/2 oz. (1.09 Kg)
A great charger, once you know how to program it (it's easy). Of course, at 50W per port, you could not (for example) charge 4 4S3000mah packs as the charger will shut down automatically. Also, get the version with built-in AC adapter - it will save you cost of a DC power supply.
|
I bought this charger to replace my old Polycharge 4. Have been using it for a few weeks now and I love it! I've used it to charge everything from tiny 1s 150 batt's up to 4s 2200 packs. I've also used it to peak charge Nicad and NiMH packs. It has performed flawlessly. Being able to monitor the voltage of each cell during charging as well as seeing how much mah has been put back into the pack is fantastic, you can see exactly what is going on at any stage during the charging process. My one gripe is that the charge leads are too short as are the balancing tap leads. Li-pos should be placed in a li-po sack while charging and the supplied leads don't allow that. I bought longer leads for both. Also only one tap adaptor is included for each of the tap styles out there, so for example if you have all TP packs then you can only use one of the supplied tap adapters and will have to buy more if you plan on balance charging multiple packs at once. Other than that I have no complaints, this is really a great charger!
|
beautiful charger i do not need any other charger very fast and precise
|
|
Write Your Own Review |
Read All Reviews...
|
Please call our support line toll free: (866) 512-1444 for assistance with this product |
Cart Items 0
