Scale Lighting Set for Executive Jet

Pre-wired and ready to install - 9 LED's total

Completely pre-wired and ready to install in your Executive Jet. Includes 1 red and 1 green position light, 1 red and 1 white strobe light each on its own circuit and 5 landing lights on 2 circuits. The heart of the system is a solid-state controller that is powered from your flight battery. It controls the strobe pattern for the 2 strobe circuits (F1 and F2); each strobe circuit is independent and can be programmed for its own pattern of flashes. The dual landing light circuits (L1 and L2) are controlled by your landing gear switch. When you flip the switch to lower the gear, the first landing light circuit lights up (3 LED's), a little more than a second later the second light circuit (2 LED's on the main gear) is switched on. Full illustrated instructions are included and the only soldering required is to connect the input power leads to the input power of the speed controls. Installation can be done either while building the jet or just as easily as a retrofit to an already built model. Can be installed on jets with fixed gear or on jets with retracts installed.