It's a jet - it's a sailplane - it's BOTH!
SOLD OUT!
57" wingspan, 36" long, 323 sq. in. wing area, 28 oz. flying weight. Soar Jet is an all-wood built-up slope glider with a 66mm ducted fan mounted above the wing. The airplane is pre-built and covered, with decorations already applied. Included is a 66mm ducted fan and nacelle. The MT2235 OUTRUNNER makes a unique combination of good power and low drag. The airfoil is thin. Weight is just right for good energy retention. Hand-launches are easy with plenty of power for strong climbs to altitude. Full span ailerons give the airplane a fast roll rate. Works well for slope flying. Aerobatic maneuvers that do not require the rudder are all possible. The one-piece wing removes for easy transport and storage. Assembly takes only a few hours. Controls are Ailerons (2 servos), Elevator and Throttle.
Here's Everything you'll need:
Radio
1 -
HTR48725 Hitec Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos
1 -
HTS0322S HS-322 Standard Servo
1 -
HT0096 Hitec Aileron "Y" Connector
Motor/Ducted Fan
1 -
MT2235 Outrunner Brushless Motor
Includes a 66mm Ducted Fan Unit - a $22.90 value!
Motor Controller
1 -
JEE025 ECO 25 Amp Brushless Controller
Battery
1 -
PQ25003 Twenty-Five 3 Cell 11.1V 2500 mAh LiPo
Charger
1 -
ETC2500 LiPoly Smart Charger for 1-4 Cells
1 -
BAT221 JST to SPEED 400 Connector Adapter
Accessory Pack
1 -
SFM219AP Accessory Pack for Soar Jet EDF
Includes: Glue, Solder, Connectors, etc.
Type of Build: Almost-Ready-To-Fly (ARF)Skill Level: Intermediate